Elements

Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for the work

1.1 Identify and follow work health and safety, legislative and organisational requirements

1.2 Read work documentation and identify job requirements

1.3 Inspect timber flooring for contamination, moisture content and suitability for sanding operations, and identify and complete any pre-sanding tasks

1.4 Assess timber flooring condition and confirm the extent of floor preparation required to meet job specifications

1.5 Remove mechanical fixings to avoid damage to equipment and surfaces

1.6 Select and check tools, equipment and materials for suitability, serviceability and safety prior to use

1.7 Plan sequence of work suited to the job

2. Conduct coarse sanding operations

2.1 Set up and check sanding equipment and safety features in accordance with manufacturer instructions

2.2 Select and change equipment to meet requirements of the job

2.3 Conduct trial runs and confirm machine operation and quality of finished work

2.4 Select, attach and routinely check sanding belts or papers and change to ensure quality finish

2.5 Complete sanding systematically and effectively within the required timeframe

2.6 Complete routine lubrication and adjustments to the equipment as required for efficient operation

2.7 Clean and check final finish against quality and job requirements, and rectify deficiencies

3. Complete housekeeping

3.1 Store and recycle unused materials in accordance with workplace procedures

3.2 Check, clean and store tools and equipment in accordance with workplace procedures

3.3 Clean work area and dispose of rubbish safely

3.4 Accurately complete required workplace documentation