Elements

Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Identify and prepare for work requirements

1.1 Identify and follow work health and safety, legislative and organisational requirements

1.2 Read work documentation and identify job requirements

1.3 Select coating material based on product qualities and client expectations

1.4 Assess selected coating materials as being compatible with each other, with the surface to be finished and with manufacturer recommendations

1.5 Select and check tools, equipment and materials for suitability, serviceability and safety prior to use

1.6 Inspect and confirm readiness of surface to be finished, and erect barrier signs to coating area

1.7 Plan sequence of work to ensure efficiency and quality of application.

2. Apply finishing system

2.1 Check ventilation before chemical fumes are released, and confirm all WHS and environmental protection requirements are met

2.2 Apply oil-based coating material in accordance with manufacturer recommendations

2.3 Observe recommended drying times between coats

2.4 Buff and sand between coats in accordance with manufacturer recommendations

2.5 Check final finish against quality and job requirements, and rectify deficiencies

2.6 Provide required floor maintenance instructions and warranty provisions to the client in accordance with workplace procedures

3. Complete housekeeping

3.1 Store and recycle unused materials in accordance with workplace procedures

3.2 Check, clean and store tools and equipment in accordance with workplace procedures

3.3 Clear and clean work area and dispose of rubbish safely

3.4 Accurately complete required workplace documentation