Elements

Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for the work

1.1 Identify and follow work health and safety, legislative and organisational requirements

1.2 Read work documentation and identify job requirements

1.3 Inspect timber flooring for contamination, moisture content and suitability for fine sanding operations, and identify and complete any pre-sanding tasks

1.4 Assess and confirm timber flooring condition and the extent of fine sanding required to meet job specifications

1.5 Select and check tools, equipment and materials for suitability, serviceability and safety prior to use

1.6 Isolate and/or encapsulate the job site to contain dust fallout from sanding operation

1.7 Plan sequence of work suited to the job

2. Conduct fine sanding operations

2.1 Set up and check sanding equipment and safety features in accordance with manufacturer instructions

2.2 Select and change equipment to meet requirements of the job

2.3 Select, attach and routinely check and change sanding belts or papers to ensure quality finish

2.4 Conduct trial runs to check machine operations and quality of finished work

2.5 Complete sanding systematically and effectively within the minimum required timeframe

2.6 Complete routine lubrication and adjustments to the equipment as required for efficient operation

2.7 Clean and check final finish against quality and job requirements, and rectify deficiencies

3. Complete housekeeping

3.1 Store and recycle unused materials in accordance with workplace procedures

3.2 Check, clean and store tools and equipment in accordance with workplace procedures

3.3 Clean work area and dispose of rubbish safely

3.4 Accurately complete required workplace documentation