Application
This unit is applicable to QA staff responsible for MHA and quality control checks on carton meat and offal. |
Prerequisites
Nil | ||
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Inspect samples of carton meat for defects | 1.1. Samples of product are taken from each line of product according to a pre-determined sampling plan. 1.2. Sample is inspected for defects in accordance with regulatory and workplace requirements as established in a government approved Hazard Analysis Critical Control Point (HACCP) program. 1.3. Defects are reported in accordance with workplace requirements. |
2. Assess samples against pre-determined defect tolerances | 2.1. Levels of defects are assessed against established tolerances. 2.2. Samples outside tolerance are reported to supervisor and corrective action is taken. 2.3. Sampling program is adhered to and results are recorded according to workplace requirements. 2.4. Sampling area is kept clean and neat to avoid contamination between samples. 2.5. Dropped meat procedures are identified and followed according to workplace requirements. |
Required Skills
Required skills |
Ability to: inspect, identify and record defects identify defects and explain the relevant critical limits and specifications interpret information including details of out of tolerance samples take corrective action if defect tolerances are exceeded follow re-inspection procedures to workplace requirements apply relevant communication and mathematical skills work effectively as an individual and as part of a team take action to improve own work performance as a result of self-evaluation, feedback from others or in response to changed work practices or technology |
Required knowledge |
Knowledge of: defect tolerance procedures for reporting defects and samples outside tolerance sampling program and consequence of not following procedures relevant Occupational Health and Safety (OH&S)requirements |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time. These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence. Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence. All assessment must be conducted against Australian meat industry standards and regulations. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Competency must be demonstrated while complying with: Australian Quarantine Inspection Service (AQIS) and/or state meat authority regulations company procedures. |
Context of, and specific resources for assessment | Assessment must take place in a meat processing plant under real working conditions. |
Method of assessment | Recommended methods of assessment include: quiz of underpinning knowledge workplace demonstration workplace referee or third-party report of performance over time. Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role. |
Guidance information for assessment | A current list of resources for this Unit of Competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Carton meat may include: | meat cuts and offal. |
Regulatory requirements may include: | Export Control Act hygiene and sanitation requirements relevant Australian Standards relevant regulations requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption federal, state and territory regulations regarding meat processing. |
Workplace requirements may include: | enterprise-specific requirements hygiene and sanitation requirements OH&S requirements QA requirements Standard Operating Procedures (SOPs) the ability to perform the task to production requirements work instructions. |
Communication skills may include: | applying numeracy skills to workplace requirements being appropriately assertive interpreting needs of internal or external customers listening and understanding reading and interpreting workplace-related documentation sharing information speaking clearly and directly using negotiation or persuasion skills working with diverse individuals and groups writing to audience needs. |
Mathematical skills may: | involve accurate recording of temperature, time, volume, weight and quantity in standard formats or proformas involve interpreting and drawing conclusions from routine charts, bar graphs, pie charts, etc involve use of calculators and computer software packages include operations involving percentages, comparisons and variations require reading and interpreting analogue and digital measures (e.g. clocks, scales, pressured gauges, thermometers, cash registers) relate to own work and work area problem-solving involve routine estimations and calculations using a range of specified formula and procedures. |
OH&S requirements may include: | enterprise OH&S policies, procedures and programs OH&S legal requirements Personal Protective Equipment (PPE) which may include: coats and aprons ear plugs or muffs eye and facial protection head-wear lifting assistance mesh aprons protective boot covers protective hand and arm covering protective head and hair covering uniforms waterproof clothing work, safety or waterproof footwear requirements set out in standards and codes of practice. |
Sectors
Unit sector |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not Applicable