Application
This unit is appropriate for those working in shotfirer roles, at worksites within:
Metalliferous mining
Prerequisites
Not applicable.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare for shotfiring operations | 1.1. Access, interpret and apply compliance documentation relevant to underground development shotfiring 1.2. Obtain, confirm and apply Blasting Management Plan and blast plan requirements for the shotfiring activity 1.3. Inspect worksite and identify, manage and report all potential hazards and ensure work area is safe 1.4. Coordinate vehicle, equipment and personnel support requirements for the work 1.5. Arrange and/or ensure survey of blast area is complete and reported to appropriate personnel and records are maintained 1.6. Access, interpret and apply geological data required to complete the work 1.7. Carry out calculations to enable pattern design, loading and tying in of shots 1.8. Identify and confirm the explosives and accessories required for the work |
2. Supervise the store and transport explosives and accessories | 2.1. Ensure explosives and accessories are safely and correctly stored in appropriate facilities 2.2. Ensure inventory control systems are accurately and correctly maintained 2.3. Ensure explosives and accessories are transported to blast area and segregate correctly 2.4. Ensure that explosives are not left unattended 2.5. Identify and dispose of any deteriorated or out of date explosives and accessories correctly |
3. Prepare for charging | 3.1. Identify, manage and report potential hazards and risks 3.2. Secure blast area in accordance with procedures and blast plan 3.3. Establish and communicate access routes to shot area for authorised persons and vehicle 3.4. Identify hole locations and any non-conforming conditions in preparation for charging 3.5. Set up charging equipment in accordance with site procedures 3.6. Prepare holes for charging in accordance with blast plan |
4. Charge holes | 4.1. Supervise blast personnel during loading operations 4.2. Prime and charge holes in accordance with the blast plan 4.3. Ensure blast holes are charged in accordance with loading plan and identify non-conforming conditions 4.4. Ensure blast holes are stemmed in accordance with blast plan 4.5. Clear the area of equipment, personnel and isolate/barricade the blast area, including warning signs 4.6. Test equipment and accessories 4.7. Maintain records 4.8. Conduct blast monitoring |
5. Conduct the blast | 5.1. Carry out pre blasting procedures and establish exclusion zone 5.2. Carry out tying in, in accordance with the blast plan 5.3. Supervise all personnel within the blast area during tie-in and initiation 5.4. Initiate the blast 5.5. Carry out and record activities in accordance with the blast plan |
6. Complete post blast activities | 6.1. Carry out post blast inspection 6.2. Secure firing circuits and initiation device 6.3. Report blasting has been completed to relevant personnel 6.4. Carry out post-blast coordination and declare area safe for re-entry 6.5. Inspect site and deal with non-conformities including misfires 6.6. Identify and dispose of surplus, damaged and deteriorated explosives and detonators 6.7. Ensure that emergency services are advised of the disposal activities in accordance with site procedures 6.8. Complete reports |
7. Carry out equipment maintenance | 7.1. Carry out inspection and required maintenance during and after shotfiring operations 7.2. Maintain maintenance records |
Required Skills
Required skills |
Specific skills are required to achieve the performance criteria in this unit, particularly for the application in the various circumstances in which this unit may be applied. This includes the ability to carry out the following as required to conduct underground development shotfiring operations: apply legislative, organisation and site requirements and procedures apply operational safety requirements read, interpret and apply technical information apply operational planning skills apply work coordination skills apply mathematical calculations using addition, subtraction, multiplication and division apply workplace communication techniques apply blasting preparation techniques apply diagnostic techniques apply explosives storage, handling and transport procedures apply charging equipment operating procedures apply hazard identify procedures apply procedures for identifying non-conformities apply records and reports maintenance procedures apply environmental compliance requirements |
Required knowledge |
Specific knowledge is required to achieve the Performance Criteria of this unit, particularly its application in a variety of circumstances in which the unit may be used. This includes knowledge of the following, as required to conduct underground development shotfiring operations: Australian standards and code of practice explosives and safety and health legislation risk management including application of appropriate controls to identified risks site and equipment safety procedures site emergency procedures environmental requirements and procedures, including vibration, noise, dust and chemicals site environmental requirements and constraints site geological information types, physical and technical characteristics, uses and limitations of explosives and protection measures associated with their use initiation systems delayed blasts cause and management of misfires non-conforming conditions non-conformities explosives disposal methods blasting management plan requirements site security plan requirements site operational procedures site underground shotfiring procedures planning processes explosive handling, transportation and storage requirements equipment characteristics, technical capabilities and limitations start-up and shutdown procedures equipment maintenance procedures isolation and lock out procedures analysis of site geological and survey data selection of appropriate explosives to meet site/ground conditions monitoring and review processes and techniques |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following: knowledge of the requirements, procedures and instructions for conducting underground development shotfiring operations implementation of requirements, procedures and techniques for the safe, effective and efficient completion of underground development shotfiring operations working with others to undertake and complete underground development shotfiring operations that meet all of the required outcomes consistent timely completion of underground development shotfiring operations that safely, effectively and efficiently meets the required outcomes |
Context of and specific resources for assessment | This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills. The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job. Customisation of assessment and delivery environment to sensitively accommodate cultural diversity. Aboriginal people and other people from a non English speaking background may have second language issues. Assessment of this competency requires typical resources normally used in the work environment. Selection and use of resources for particular worksites may differ due to site circumstances. Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required. |
Method of assessment | This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods: written and/or oral assessment of the candidate's required knowledge observed, documented and/or first hand testimonial evidence of the candidate's: implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes consistently achieving the required outcomes first hand testimonial evidence of the candidate's: working with others to undertake and complete underground development shotfiring operations |
Guidance information for assessment | Consult the SkillsDMC User Guide for further information on assessment including access and equity issues. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Relevant compliance documentation may include: | legislative, organisation and site requirements and procedures manufacturer's guidelines and specifications Australian standards code of practice Employment and workplace relations legislation Equal Employment Opportunity and Disability Discrimination legislation |
Blast plan requirements may include: | nature and scope of tasks and achievement targets site location and layout location and direction of blast holes sleeping charges equipment required security measures and procedures monitoring requirements type and quantity of explosives and wet or dry holes stemming material type and quantity of explosives and accessories initiation methods out of bounds areas operational conditions coordination requirements or issues hazards and potential hazards waste management requirements environmental control requirements worksite inspection requirements barricade and signage requirements obtaining of permits required equipment availability and/or requirements plant or equipment defects transport arrangements and/or requirements safe storage requirements public relations requirements |
Site inspections may include: | positioning stemming cleaning up weather check fencing/signage and access routes marking/hole identification inspection measuring holes dewatering holes |
Hazards may include: | chemical energy, including: premature explosion deterioration of explosives stored energy working environment, including: rock stability and ventilation weather conditions insufficient illumination methane coal dust NOX gases poor road or rail conditions strata conditions fire/flames/ignition sources atmospheric contaminants dust and fumes noise ground conditions, including: hot ground scaling lack of ventilation extraneous electricity e.g. static electricity, lightning tipping hazards debris air blast and fly lost holes radioactivity water equipment and materials, including: faulty explosives misfires drilling into misfires premature explosion faulty vehicle faulty equipment broken detonation leads high voltage electricity radio frequencies and transmitters hot exhaust system high air and water pressures hydraulic oil pressure people, including: speeding unauthorised persons theft trespassers processes and procedures, including: back injuries drilling in butts lost holes |
Equipment may include: | siren radios signs vehicles approved for carrying dangerous goods and explosives explosives mixers pumps plugs (to seal finished holes prior to loading) measuring tape cutting implements blast monitoring systems video camera |
Support requirements may include | other equipment and their operators vehicles public and site notification |
Survey of blast area includes: | locate position, direction and incline of blast holes survey reports |
Geological data may include: | rock type structures faults intrusions weathering wet and dry holes hot ground reactive ground hot and reactive ground |
Calculations may include: | depth of holes temperatures water problems pattern design types of explosive BCM explosives quantity powder factor |
Explosives may include: | high explosives low explosives bulk and packaged explosives deflagrating explosives permitted explosives wet or dry variable density |
Accessories may include: | primers delays down lines trunk lines lead-in lines detonators and detonator assemblies detonation mechanisms including: bell wire and firing lines delay mechanisms blasting machines or mains firing equipment explosives tester binding tape fuses and igniter cords detonators and detonating cord gas bags decking stemming hole liner blast monitoring equipment firing cables / bell wire exploders and testers electronic firing equipment specialist tools initiators |
Inventory control systems may include: | types and quantities of explosives shelf life distribution records |
Dispose of explosives may include: | burning by the shotfirers on site detonation in a production drill hole detonation in a controlled manner return to supplier or delivery or surrender to an Explosives Inspector for destruction |
Secure blast area sometimes referred to as 'exclusion zones', may be marked or delineated by one or more of the following: | signage windrow bund wall ribbon tape witches hats ropes flags or pegs sentries gates |
Non-conforming conditions may include: | misfires blockages break through deviation undercut ground conditions ventilation water/wet holes hot ground |
Pre-blasting procedures may include: | warnings sentries area clearance |
Blast initiation systems may include: | safety fuse detonating cord non-electric detonator electric detonator electronic detonator remote firing |
Misfires may be caused by: | faulty explosives or accessories damaged or deteriorated explosives or accessories improperly assembled explosives components inappropriate or incomplete combinations of components operator error or inexperience inattention to detail or ignorance environmental influences, e.g. wet weather or poor visibility |
Post-blast coordination may include: | the return of unused explosives the return of other equipment the withdrawing sentries removal of signs turning off safety devices ventilation of area collection of environmental monitoring equipment recording of environmental monitoring data maintenance may include: testing of exploders servicing of mixing equipment maintenance of hand tools operational maintenance of bulk delivery equipment |
Damaged and deteriorated explosives may be identified by: | exudation efflorescence sweating liquefaction hardening softening discolouration crystallisation staining damage to wrappers and carcasses damage to containers physical wear and tear kinking abrasions and cuts crushing loss of identification labels and markings exposure to the elements. |
Sectors
Blasting
Competency Field
Refer to Unit Sector(s).
Co-Requisites
Not applicable.
Employability Skills
This unit contains employability skills.
Licensing Information
Refer to Unit Descriptor.