Application
This unit describes a participant’s skills and knowledge required to conduct wireline core drilling in the Resources and Infrastructure Industry.
This unit is appropriate for those working in operational roles.
No licensing, legislative or certification requirements apply to this unit at the time of publication
Elements and Performance Criteria
1. Plan and prepare for wireline core drilling | 1.1 Access, interpret and apply conduct wireline core drilling documentation and ensure the work activity is compliant 1.2 Obtain, read, interpret, clarify and confirm work requirements 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures 1.4 Select and wear personal protective equipment appropriate for work activities 1.5 Communicate and coordinate activities with others throughout the work activity 1.6 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Operate core drill | 2.1 Carry out pre-start and start up procedures 2.2 Identify, select and apply rig operational controls 2.3 Identify and use different drill rod and casing types, thread forms and thread make up parameters 2.4 Select appropriate drill bits and reamer shells 2.5 Adjust inner tube length to ensure appropriate fluid flow around the core 2.6 Use rod and casing handling equipment safely 2.7 Add/break out and remove drill rods/pipes and down hole equipment 2.8 Apply appropriate rotation speed, weight on the bit, drilling fluid flow rate and penetration rate applicable to the ground conditions 2.9 Measure drill string components and calculate depth of hole 2.10 Collar holes 2.11 Install casing |
3. Operate drill fluid system | 3.1 Identify hole conditions requiring the use of drilling fluids and chemicals 3.2 Select, prepare, apply, test and monitor suitable fluids and additives 3.3 Monitor fluid return and solids content and implement control measures 3.4 Monitor fluid and cuttings specific gravity and up hole velocity to ensure efficient hole clearing 3.5 Monitor causes of pressure in fluid systems 3.6 Select the appropriate fluid pumping rate for the hole size |
4. Operate wireline | 4.1 Use overshot retrieval and dry release system 4.2 Assemble and maintain wireline overshot 4.3 Use pump in and dry hole lowering devices |
5. Use hole survey and core orientation equipment | 5.1 Use survey tool, as required 5.2 Assemble and maintain survey and core orientation devices 5.3 Read and record survey data 5.4 Operate core orientation devices as required |
6. Take core samples | 6.1 Implement control measures for minimising core loss 6.2 Identify core blockages affecting sample quality |
7. Respond to problems | 7.1 Identify possible problems in equipment or process 7.2 Determine problems needing action 7.3 Determine possible fault causes 7.4 Rectify problem using appropriate solution within area of responsibility 7.5 Follow through items initiated until final resolution has occurred 7.6 Report problems outside area of responsibility to designated person |
8. Complete equipment maintenance and housekeeping | 8.1 Carry out shutdown and secure equipment 8.2 Strip impregnated bits according to manufacturer/company procedures 8.3 Dismantle and service backend assembly 8.4 Dismantle core barrels, service and replace worn/damaged components 8.5 Dismantle wireline retrieval components service and replace worn/damaged components if required 8.6 Maintain drill string 8.7 Maintain bit management, record required information and store bits correctly 8.8 Ensure housekeeping activities are completed 8.9 Process records |
Evidence of Performance
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient completion of wireline core drilling including:
conducting routine checks and basic maintenance
mixing and applying collar sealants
using collar casing equipment attachment techniques
conducting basic drilling fluid tests, viscosity and specific gravity
core handling and tray placement
works effectively with others to undertake and complete wireline core drilling tasks that meet all of the required outcomes including:
complying with written and verbal reporting requirements and procedures
communicating clearly and concisely with others to receive and clarify work instructions
communicating clearly and concisely with others to resolve coordination requirements prior to commencing and during work activities
demonstrates completion of wireline core drilling that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
identifying and using different drill rod or casing types, thread forms and thread make up parameters
selecting appropriate drill bits and reamer shells
adjusting inner tube length to ensure appropriate fluid flow around the core
applying appropriate rotation speed, weight on the bit, drilling fluid flow rate and penetration rate applicable to the ground conditions
measuring drill string components and calculating depth of hole
installing casing and seal at the collar
identifying hole conditions requiring the use of drilling fluid additives
monitoring fluid and cuttings specific gravity and up hole velocity to ensure efficient hole clearing
selecting the appropriate fluid pumping rate for the hole size
assembling, maintaining and using survey and core orientation devices
Evidence of Knowledge
The candidate must demonstrate knowledge in conducting wireline core drilling through:
accessing, interpreting and applying the organisation and site requirements and procedures for:
work, health and safety
environmental issues
operating drill rig
housekeeping
understanding the configuration requirements of various thread forms and make-up torque requirements
understanding the function of hole collaring, use of casing and collar sealing techniques
complying with methods required to produce uncontaminated samples
understanding the impregnated bit stripping procedures
understanding the bit selection for different types of drilling and different ground conditions
understanding the measurement of bits and other related components
understanding the critical dimensions of a core barrel if the barrel has to be drilled through to reduce hole size
understanding the relationships between penetration rate and bit life
understanding the role that core blockages play in affecting sample quality
understanding the functions of drilling fluids and control procedures
understanding the relationship between hole diameter, rod diameter, pump output and the specific gravity of formation cutting
understanding the types of mud and water delivery pumps and their applications
understanding the hazards associated with wireline operations and control measures required
understanding the purpose of drill hole surveys and the functions of azimuth and dip readings and where it is applied
understanding the core orientation and where it is applicable being prepared for fire/accident/emergency
Assessment Conditions
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years | |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. | |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.