Application
This unit is appropriate for those working in an operational role at worksites within:
Metalliferous mining
Prerequisites
Not applicable.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare for solvent extraction | 1.1. Access, interpret and apply compliance documentation relevant to the work activity 1.2. Receive, interpret and clarify shift changeover details 1.3. Communicate with other personnel 1.4. Select personal protective equipment appropriate for work activities 1.5. Select appropriate type of auxiliary equipment 1.6. Perform equipment pre-start checks 1.7. Identify, address and report potential risks and hazards 1.8. Identify, address and report environmental issues 1.9. Adhere to emergency procedures 1.10. Use dust suppression and extraction methods 1.11. Ensure area is well ventilated |
2. Start-up equipment in sequence | 2.1. Carry out start-up procedures and completes start-up checks according to plant configurations and system requirements 2.2. Confirm plant is operational |
3. Operate and monitor equipment | 3.1. Read and interpret data from equipment indicators 3.2. Continuously inspect operations/plant and containment areas for defects and potential problems 3.3. Adjust equipment to approved operating parameters 3.4. Add reagents to approved operating parameters 3.5. Carry out operator level maintenance 3.6. Complete all required documentation 3.7. Pass on end of shift information to incoming shift |
4. Conduct housekeeping activities | 4.1. Clean plant 4.2. Identify, address and report hazards |
5. Shutdown in sequence and/or isolate equipment | 5.1. Shutdown or isolate equipment based on process and safety requirements 5.2. Perform post shutdown or isolation checks |
Required Skills
Required skills |
Specific skills are required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes the ability to carry out the following, as required to conduct solvent extraction: apply legislative, organisation and site requirements and procedures for conducting solvent extraction identify and manage hazards handle hazardous substances interpret reports apply lifting (manual, cranes and loads) maintain records report defects employ safe work practices fault finding use hand and power tools |
Required knowledge |
Specific knowledge is required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes knowledge of the following, as required to conducting solvent extraction: breakdown procedures contaminant identification solvent extraction process emergency procedures environmental principles equipment operating parameters equipment safety requirements hazardous substance procedures and consequences of spills isolation procedures metallurgical and technical data operational procedures and checks pumping system and flow charts (pipeline and sprinkler systems) reagent types sampling solvent extraction safety requirements types of ores wet and dry working procedures |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following: knowledge of the requirements, procedures and instructions for conducting solvent extraction implementation of requirements, procedures and techniques for the safe, effective and efficient completion of solvent extraction working with others to undertake and complete the solvent extraction in a way that meets all of the required outcomes consistent timely completion of solvent extraction that safely, effectively and efficiently meets the required outcomes |
Context of and specific resources for assessment | This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills. Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances. The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job. Customisation of assessment and delivery environment to sensitively accommodate cultural diversity. Aboriginal people and other people from a non English speaking background may have second language issues. Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required. |
Method of assessment | This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods: written and/or oral assessment of the candidate's required knowledge observed, documented and/or first hand testimonial evidence of the candidate's: implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes consistent achievement of required outcomes first hand testimonial evidence of the candidate's: working with others to undertake and complete the solvent extraction |
Guidance information for assessment | Consult the SkillsDMC User Guide for further information on assessment including access and equity issues. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Relevant compliance documentation may include: | legislative, organisational and site requirements and procedures manufacturer's guidelines and specifications Australian standards Employment and workplace relations legislation Equal Employment Opportunity and Disability Discrimination legislation |
Legislation may include Acts and regulations dealing with: | mining safety and health mine inspection OHS explosives |
Auxiliary equipment may be anything that is portable and mobile that is not part of the fixed infrastructure, and may include: | compressors distribution control systems (DCS) feeders gantry cranes and attachments and other mobile equipment hand and power tools hoses |
Pre-start checks may include: | availability of equipment (e.g. conveyor) detection of conditions that are unusual personnel availability job requirements levels walk through plant |
Environmental issues may include: | drainage dust (dump) emissions flora and fauna hazardous chemicals noise recycling run-off spills waste management and disposal water quality |
Start-up procedures may include: | cameras and monitors interlocks distribution control system flash vessels launders heat exchangers hydraulic system pumping system screen inspections scuttling pumps pipes and flanges drive belts valves vessels visual and audio warning devices and lights suppression systems |
Plant may include: | heat exchanger burners lines gas train vessels conveyors valves |
Indicator readings may measure: | flow current (e.g. agitators) density levels restrictions pressure speed (e.g. pumps) unusual noises vibrations power temperature |
Equipment and plant cleaning methods may include: | hosing with water high pressure cleaning |
Monitoring the drying process may include the checking of: | blockages and spillages feed rates mineral content moisture levels on stream analysis (OSA) overloads pressures power draw temperature wear and tear emissions (e.g. cyanide) levels laboratory results |
Post-shutdown checks are like pre-start checks | |
The methods used to optimise the plant may include: | quantity of reagents flow temperature pressure A/C ratio condensate quality |
Materials may include: | slurry steam |
Contaminants are anything other than the ore. Common contaminants may include: | oil fuel gases organic materials moisture |
Sectors
Refining
Competency Field
Refer to Unit Sector(s).
Co-Requisites
Not applicable.
Employability Skills
This unit contains employability skills.
Licensing Information
Refer to Unit Descriptor.