Application
This unit applies to hospitality and catering operations where espresso coffee is extracted and served. It reflects the role of an espresso machine operator (barista) and others who make coffee using a commercial espresso machine in a variety of hospitality settings. | |
Prerequisites
Nil | |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA | ||
1 | Organise and prepare work areas. | 1.1 | Organise coffee workstation according to workplace safety and hygiene practices, to enable efficient work flow and easy access to equipment and commodities. |
1.2 | Develop preparation and work routines according to enterprise requirements. | ||
1.3 | Complete mise en place and preparation for coffee service according to enterprise procedures. | ||
1.4 | Store coffee and commodities in appropriate airtight containers and conditions to maintain quality and freshness, according to workplace hygiene procedures and food safety regulations. | ||
2 | Provide customer service and advise customers on espresso coffee. | 2.1 | Provide advice to customers about coffee types and characteristics where appropriate. |
2.2 | Determine customer coffee preferences and requirements, and offer coffee style choices and accompaniments accordingly. | ||
3 | Select and grind coffee. | 3.1 | Select coffee and grind to correct particle size, according to enterprise requirements and customer preferences. |
3.2 | Take into consideration any environmental and equipment factors affecting dosage, and adjust grind and dose accordingly. | ||
4 | Extract coffee. | 4.1 | Select appropriate cups or glassware and ensure they are warm before preparation. |
4.2 | Measure or dispense required dosage and place into clean filter basket, tamping coffee evenly using correct pressure. | ||
4.3 | Ensure group head is clean prior to inserting group handle. | ||
4.4 | Monitor water and pump pressure, and moderate between cycles, according to enterprise procedures. | ||
4.5 | Analyse extraction rate and adjust where appropriate. | ||
4.6 | Assess quality of extraction visually and where appropriate by verifying flavour. | ||
4.7 | Check spent grounds (puck or cake) to identify any required adjustments to dosage and technique. | ||
4.8 | Release or purge water for two seconds from the group head before placement of group handle to extract coffee. | ||
5 | Texture milk. | 5.1 | Select correct cold milk and appropriate clean, cold jug according to espresso requirements and quantity on order. |
5.2 | Expel excess water from steam wand before and after texturising milk and wipe clean after use. | ||
5.3 | Texture milk according to milk type and specific order requirements. | ||
5.4 | Combine foam and milk through rolling, ensuring even consistency. | ||
5.5 | Pour milk promptly, evenly and consistently, according to coffee style and customer preferences. | ||
6 | Serve and present espresso coffee. | 6.1 | Present coffee attractively using clean ceramic or glass cups and avoiding drips and spills. |
6.2 | Serve coffee at the required temperature, according to customer requirements and style, with appropriate crema, milk froth and accompaniments. | ||
7 | Clean and maintain espresso machine. | 7.1 | Follow required OHS and enterprise requirements throughout all cleaning and maintenance procedures. |
7.2 | Clean all machine and parts thoroughly and safely according to manufacturer specifications and enterprise policies and procedures, using appropriate cleaning methods and recommended cleaning products and materials. | ||
7.3 | Carry out allied end of service activities. | ||
7.4 | Monitor and assess the operation and efficiency of the espresso machine and grinder during usage and take appropriate action where required in relation to defects and faults according to enterprise policies and procedures, OHS and warranty requirements. | ||
7.5 | Identify situations requiring the attendance of a trained service technician, licensed electrician or a designated senior person within the enterprise. | ||
7.6 | Use energy and water resources efficiently when preparing coffee and cleaning equipment to reduce negative environmental impacts. |
Required Skills
This section describes the essential skills and knowledge and their level, required for this unit. |
The following skills must be assessed as part of this unit: hygiene and food safety practices related to making, serving and storing coffee, coffee products and service equipment techniques for dosing, tamping and purging group head extraction and presentation of quality coffee milk texturing skills safe work practices when using coffee machines and other equipment, including posture at workstation numeracy skills to calculate and measure doses of coffee. |
The following knowledge must be assessed as part of this unit: major coffee styles and their characteristics types of bean, blends and roasts with a particular emphasis on espresso roast key principles of coffee making appropriate pour rate for espresso coffee (industry recommended rate is 30 ml in 27-32 seconds depending on type of espresso coffee ordered, customer preferences and the coffee blend) factors that affect quality of coffee types of grind and grinding equipment types of machines and equipment and their main features and differences sizes and types of filter baskets, tampers and other equipment different milk types and their characteristics, including requirements for handling and storing milk storage conditions and requirements for coffee and commodities cleaning and maintenance procedures symptoms of potential faults in espresso machines and grinders sequencing and production of orders. |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the Assessment Guidelines for this Training Package. | |
Critical aspects for assessment and evidence required to demonstrate competency | Evidence of the following is essential: ability to recognise quality in espresso coffee, meet customer requirements and expectations, and identify factors affecting quality and required outcomes ability to address problems during preparation and service of espresso coffee ability to extract and present quality coffee within realistic timelines compliance with all workplace hygiene and food safety regulations safe work practices in making espresso coffee. |
Context of and specific resources for assessment | Assessment must ensure: access to a workstation with industry-current commercial espresso machine and appropriate equipment, including: thermometer coffee grinders or mills serviceware, including cups, saucers, glasses, mugs and flatware weighing and measuring equipment storage bins in appropriate sizes and materials blind or blank filters tampers espresso cleaning detergent bins for discarded pucks or grind tubes access to a range of coffee types and commodities preparation of quantities of coffee items within industry-realistic timeframes for multiple customers simultaneously preparation and service of varieties of coffee types to meet various customer requirements. |
Methods of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate: direct observation of practical demonstration of extracting and serving coffee over an entire service period tasting of coffee prepared by the candidate use of video or peer observation written or oral questions to assess required knowledge relating to preparing and serving espresso coffee review of portfolios of evidence and third-party workplace reports of on-the-job performance by the candidate. Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example: SITXOHS002A Follow workplace hygiene procedures SITHACS006B Clean premises and equipment SITHFAB010C Prepare and serve non-alcoholic beverages. |
Assessing employability skills | Employability skills are integral to effective performance in the workplace and are broadly consistent across industry sectors. How these skills are applied varies between occupations and qualifications due to the different work functions and contexts. Employability skills embedded in this unit should be assessed holistically with other relevant units that make up the skill set or qualification and in the context of the job role. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the performance criteria is detailed below. | |
Equipment may include: | types and brands of coffee grinders or mills and coffee machines serviceware, including cups, saucers, mugs and glasses of various sizes flatware weighing equipment measuring equipment tampers blind or blank filter and espresso cleaning detergent thermometer storage bins in appropriate sizes and materials bins for discarded pucks. |
Enterprise requirements may include: | policies and procedures related to persons authorised and trained to carry out particular activities related to machine operation, adjustment, cleaning and maintenance circumstances requiring the services of an authorised and trained technician specific requirements for routine and non-routine cleaning and maintenance requirements for checking and replacing parts and equipment specific requirements for decoration of coffee prior to presentation, such as stencils, logos, sprinkled toppings and coffee art policies and procedures for stock control, ordering and rotation. |
Mise en place and preparation for coffee service include: | turning on machines to achieve correct pressure and temperature setting out cups, mugs, saucers, plates, jugs, glasses and other required serviceware ensuring adequate supplies of coffee, milk varieties and sugars, including specialised sugars and substitutes assembling flavourings and toppings laying out flatware, serviettes and wipes. |
Coffee styles to be prepared must include: | short black (espresso) long black cappuccino flat white caffe latte short and long macchiato mocha. |
Factors to consider in grinding coffee include: | pre-setting grinder sensory analysis of grind, including: visual tactile olfactory tasting of finished product. |
Cleaning procedures include: | wiping down entire machine to ensure cleanliness purging reservoir of hot water, releasing steam and backwashing the machine with an appropriate cleaning solution pouring boiling water to clean drainage pipes backflushing the machine at the end of a service cycle, using clean water to ensure no chemical and other residues are left cleaning the bean hopper using wet method, and drying thoroughly before refilling and storing brushing out dispensers cleaning all remaining parts using dry cleaning method backflushing group heads according to recommended industry methods, using a blank filter and appropriate machine detergent using colour-coded cloths, such as using blue for general cleaning and yellow for cleaning and wrapping steam wands wiping steamer wands after each use, using a damp cloth where there is build-up or caked-on product, wrapping steamer wands in a clean cloth, opening the valve and allowing hot water, with steam venting, to soften caked-on milk and then wiping with a damp cloth washing drip trays removing shower screens and diffusers if appropriate, cleaning using wet method and reassembling cleaning around the inside of the group head using an appropriate brush or cloth cleaning group handle and filter basket and steam arm spout after removing, using the wet method using correct and environmentally sound disposal methods for coffe making waste including recyclable glass and plastic bottles and containers. |
Cleaning methods must include using a range of techniques, including: | wet techniques: using warm water with recommended detergent for soaking various parts and cleaning with sponge, damp cloth or scourer (only for group handle) dry techniques: using a damp cloth followed by a dry cloth. |
End of service activities include: | removing beans from hoppers at the end of service day or shift storing according to enterprise requirements. |
Monitor and assess the espresso machine and grinder may include: | ensuring the dosing chamber delivers the correct dosage of coffee checking steam and pump pressure stripping the grinder of external working parts, observing required safety procedures according to enterprise requirements. |
Sectors
Sector | Hospitality |
Competency Field
Food and Beverage | |
Employability Skills
The required outcomes described in this unit of competency contain applicable facets of employability skills. The Employability Skills Summary of the qualification in which this unit is packaged will assist in identifying employability skills requirements. | |
Licensing Information
Not applicable.