- TDMMR3407B - OPERATE DECK MACHINERY
TDMMR3407B
OPERATE DECK MACHINERY
Application
The unit has application in the qualification for an Integrated Rating, i.e. Certificate III in Transport&Distribution(Maritime Operations - Integrated Rating). |
Prerequisites
Not applicable.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA | ||||
1 | Operate deck machinery | a | Pre-operational checks of deck machinery and associated systems are carried out in accordance with safety requirements and shipboard practices | ||
b | Operation of deck machinery is performed in accordance with manufacturer's specifications and instructions and safety requirements | ||||
c | Any operational problems encountered in the use of deck machinery on the vessel are reported and/or rectified in accordance with procedures | ||||
d | Malfunctioning equipment is identified and the nature of the fault is investigated and the outcomes reported in accordance with procedures | ||||
e | Post-operational checks of deck machinery and associated systems are carried out in accordance with safety requirements and shipboard practices | ||||
f | Records of equipment status and identified defects and malfunctions are completed in accordance with procedures | ||||
2 | Carry out routine planned maintenance of deck machinery | a | Maintenance arrangements for deck machinery on the vessel are carried out in accordance with survey requirements and manufacturer's specifications | ||
b | Operational problems or faults with the vessel's deck machinery are identified and the causes identified | ||||
c | Any restrictions to operations arising from identified malfunctions of the deck machinery are justified and reported as required |
ELEMENT | PERFORMANCE CRITERIA | ||||
2 | Carry out routine planned maintenance of deck machinery (continued) | d | Routine lubrication and other preventative maintenance of deck machinery is carried out in accordance with manufacturer's instructions | ||
e | Faulty deck machinery, equipment and parts are identified, reported and repaired or replaced as per manufacturer's instructions and procedures | ||||
f | Required adjustments to the deck machinery are carried out in accordance with manufacturer's specifications | ||||
g | Records of preventative and remedial maintenance carried out on deck machinery are completed in accordance with procedures | ||||
3 | Apply safety and hazard control procedures | a | Safety, hazard minimisation and pollution control procedures and regulations are followed at all times during the operation of deck machinery | ||
b | Operational and maintenance hazards related to deck machinery use and maintenance are identified and action is taken to minimise or eliminate risk to personnel, vessel and the environment | ||||
c | Action is taken in the event of failure or emergency to ensure the isolation and security of the deck machinery and maintain the safety of the vessel and personnel involved | ||||
d | Vessel's emergency and contingency plans are followed in the event of a failure or emergency involving deck machinery |
Required Skills
REQUIRED KNOWLEDGE | |||
This describes the knowledge required for this unit | |||
1 | Applicable sections of the relevant maritime regulations | ||
2 | Relevant OH&S and pollution control legislation and codes of practice | ||
3 | Principal design, safety features and component parts of deck machinery | ||
4 | Procedures for operating and carrying out planned maintenance of deck machinery | ||
5 | Procedures for isolating defective deck machinery or components | ||
6 | Repair and/or replacement procedures for deck machinery and components | ||
7 | Principles and procedures of machinery lubrication as they relate to deck machinery on a vessel, including: | ||
a | application of grease | ||
b | changing of gearbox lubricating oil | ||
c | lubrication of a steel wire rope | ||
d | applications and use of 'denso' tape | ||
e | changing of lubricating and hydraulic oil | ||
8 | Procedures for the replacement of flexible hoses in deck machinery | ||
9 | Procedures for using hand and power tools for typical maintenance operations on deck machinery | ||
10 | Maintenance and repair hazards and problems and appropriate preventative and remedial action and solutions | ||
11 | Safety, environmental and hazard control precautions and procedures relevant to the operation and maintenance of deck machinery | ||
12 | Safe procedures for handling heavy machinery and component parts during maintenance of deck machinery | ||
13 | Purpose and content of material safety data sheets | ||
14 | Maritime communication techniques needed during the use and maintenance of deck machinery on a vessel | ||
15 | Maintenance records that must be maintained on a commercial vessel |
REQUIRED SKILLS | |
This describes the basic skills required for this unit. | |
1 | Use basic verbal and other forms of communication skills required during the operation of deck machinery |
2 | Read, interpret and apply manuals and standard operating procedures related to the operation and servicing of deck machinery |
3 | Complete any required records related to the operation of deck machinery on a vessel |
4 | Work safely and collaboratively with others during the operation of deck machinery on a vessel |
5 | Select and use relevant tools and equipment as per instructions |
6 | Recognise faulty equipment and take appropriate action as per operating instructions |
7 | Recognise routine problems and hazards while operating deck machinery and take appropriate action |
8 | Adapt to differences in vessels, equipment and standard operating procedures |
9 | Follow required work schedule as per company requirements |
Evidence Required
TDMMR3401B OPERATE DECK MACHINERY | ||||||
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, | ||||||
1 | Critical aspects of evidence required to demonstrate competency in this unit: | Assessment must confirm appropriate knowledge and skills to: | ||||
a | Use and carry out planned routine maintenance of deck machinery | |||||
b | Identify typical problems related to the deck machinery operation and maintenance and take appropriate action in conjunction with other vessel personnel | |||||
c | Ensure the exercise of all required safety, environmental and hazard control precautions and procedures during deck machinery operation and maintenance | |||||
d | Communicate effectively with others during the operation and maintenance of deck machinery | |||||
2 | Evidence required for demonstration of consistent performance | a | Performance is demonstrated consistently over a period of time and in a suitable range of contexts | |||
b | Consistently applies underpinning knowledge and skills when: | |||||
1 | using and carrying out planned routine maintenance of deck machinery | |||||
2 | identifying and operational and maintenance problems and determining appropriate courses of action | |||||
3 | ensuring the application of safety precautions relevant to use and maintenance of deck machinery | |||||
c | Shows evidence of application of relevant workplace procedures, including: | |||||
1 | relevant sections of maritime regulations | |||||
2 | ISM Safety Management Code procedures | |||||
3 | OH&S regulations, pollution control and hazard prevention policies and procedures | |||||
4 | job procedures and work instructions | |||||
5 | relevant deck machinery manufacturer's guidelines relating to operation routine maintenance procedures | |||||
6 | environmental protection procedures when carrying out maintenance operations | |||||
d | Action is taken promptly to report and/or rectify defective or malfunctioning deck machinery, equipment and components in accordance with manufacturer's instructions and established procedures | |||||
e | Work is completed systematically with required attention to detail | |||||
f | Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions between crew and others |
TDMMR3407B OPERATE DECK MACHINERY | |||||||
3 | Context of assessment | a | Assessment of competency must comply with the assessment requirements of the relevant maritime regulations | ||||
b | Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation: | ||||||
1 | As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and | ||||||
2 | Appropriate practical assessment must occur: | ||||||
i | at the registered training organisation; and/or | ||||||
ii | on an appropriate working or training vessel | ||||||
4 | Specificresourcesrequired for assessment | Access is required to opportunities to: | |||||
a | participate in a range of exercises, case studies and other simulated practical and knowledge assessments that demonstrate the skills and knowledge to use and carry out planned routine maintenance of deck machinery on a vessel; and/or | ||||||
b | use and carry out planned routine maintenance of deck machinery on an operational commercial or training vessel |
Range Statement
TDMMR3407B OPERATE DECK MACHINERY | ||||||||
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. | ||||||||
VARIABLE | SCOPE | |||||||
1. GENERAL CONTEXT | ||||||||
a. | Work must be carried out: | 1 | in compliance with the relevant regulatory requirements for the operation and maintenance of deck machinery | |||||
b. | Work is performed: | 1 | within established operational requirements, with responsibility for own outputs in relation to specified quality standards and limited responsibility for within a team in achieving the specified quality and quantity of outcomes | |||||
c. | Work involves: | 1 | the operation and planned routine maintenance of deck machinery on a vessel | |||||
2. WORKSITE ENVIRONMENT | ||||||||
a | Vessel may include: | 1 | any Australian or international commercial vessel | |||||
b | Operation and maintenance of the deck machinery may be carried out: | 1 | by day or night | |||||
2 | while underway | |||||||
3 | during berthing and unberthing operations | |||||||
4 | while anchoring or mooring | |||||||
5 | while in port | |||||||
6 | while moored or at anchor | |||||||
c | Maintenance may include: | 1 | planned maintenance systems | |||||
2 | operational checks | |||||||
3 | recording | |||||||
4 | reporting | |||||||
5 | isolation | |||||||
6 | cleanliness |
TDMMR3407B OPERATE DECK MACHINERY | |||||||
VARIABLE | SCOPE | ||||||
c | Maintenance may include: (continued) | 7 | use of correct tools, parts, and lubricants | ||||
8 | worksite preparation | ||||||
d | Deck machinery may include: | 1 | anchoring windlasses | ||||
2 | mooring equipment | ||||||
3 | cargo hatch covers | ||||||
4 | cranes and derricks | ||||||
5 | lifeboat davits | ||||||
6 | gangways and pilot ladders | ||||||
7 | ventilators and breathers | ||||||
8 | fairleads and rollers | ||||||
e | Hydraulic Components of deck machinery may include: | 1 | pump | ||||
2 | reservoir | ||||||
3 | rams | ||||||
4 | motors | ||||||
5 | filters | ||||||
6 | coolers | ||||||
7 | valves, | ||||||
8 | control valves and relief valves | ||||||
9 | pipes and hoses | ||||||
f | Maintenance tools and equipment may include: | 1 | hand and power tools | ||||
2 | greasing and lubrication tools | ||||||
3 | protective clothing and equipment, including: | ||||||
i | eye and ear protection | ||||||
ii | safety boots and helmet | ||||||
iii | dust and fume masks |
TDMMR3407B OPERATE DECK MACHINERY | |||||||
VARIABLE | SCOPE | ||||||
g | Hazards when operating and maintaining deck machinery may include: | 1 | rotating and moving parts | ||||
2 | high pressure systems | ||||||
3 | slippery deck | ||||||
4 | sharp tools and implements | ||||||
5 | power tools | ||||||
6 | electrical circuits | ||||||
7 | cleaning chemicals | ||||||
8 | oil | ||||||
9 | pollution | ||||||
10 | heat | ||||||
11 | cables and ropes | ||||||
12 | faulty machinery equipment handling equipment and lifting gear | ||||||
13 | using equipment beyond safe working limits | ||||||
14 | poor housekeeping procedures | ||||||
15 | non-compliance with safe working procedures | ||||||
h | Documentation and recordsmay include: | 1 | ISM Code safety management system plans, procedures, checklists and instructions | ||||
2 | planned maintenance system | ||||||
3 | OH&S regulations and policy | ||||||
4 | maintenance records | ||||||
5 | deck machinery manufacturer's instructions, specifications and recommended procedures | ||||||
6 | relevant Australian standards | ||||||
i | Applicable legislation, regulations and codes may include: | 1 | sections of the IMO STCW 95 Convention and Code and AMSA Marine Orders related to deck operations and maintenance | ||||
2 | relevant Commonwealth, State and Territory OH&S and pollution control legislation |
Sectors
Not applicable.
Employability Skills
Not applicable.
Licensing Information
Licensing/legislative requirements | The unit is consistent with the relevant sections of STCW 95 and Marine Orders under the Australian Navigation Act 1912, describing the specific requirements for Integrated Ratings. |