Application
Persons achieving competence in this unit will need to fulfil the applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines. Work is performed under some supervision, generally within a team environment. It involves the application of routine operational principles and procedures to install and repair temporary track supports as part of workplace activities across a variety of operational contexts within the Australian rail system. Operators of mechanised equipment must have undertaken training and, where appropriate, hold the relevant licence, permit or certificate and be recognised as competent for the class of machinery being used. |
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1Determine job requirements | 1.1 Worksite is identified 1.2 Plant, equipment and materials are organised to meet the scope of the job and installation type |
2Prepare and install or repair temporary support | 2.1 Where required, foundation is prepared in accordance with site requirements and to specifications 2.2 Component surfaces are treated with appropriate coating as required to prevent degradation of components 2.3 Temporary support is installed in accordance with workplace standards and procedures 2.4 Level and alignment is adjusted to the running surface to ensure the correct geometry and profile 2.5 Where required, temporary support is adjusted/readjusted and secured to ensure full bearing is achieved for integrity and safety of structure |
3Complete documentation | 3.1 Documentation is completed as required in accordance with workplace procedures |
Required Skills
REQUIRED KNOWLEDGE AND SKILLS |
This describes the essential knowledge and skills and their level required for this unit. |
Required knowledge: |
Relevant safety, OH&S and environmental procedures and regulations |
Workplace procedures for the installation and repair of temporary track supports |
Problems that may occur during the installation and repair of temporary track supports, and action that can be taken to report or resolve the problems |
Hazards that may exist during the installation and repair of temporary track supports, and ways of controlling the risks involved |
Emergency procedures |
Local authority procedures |
Relevant recording and documentation procedures |
Required skills: |
Communicate effectively with others when installing or repairing temporary track supports |
Read and interpret plans, specifications, instructions and manuals relevant to the installation or repair of temporary track supports |
Follow operational instructions and work sequences when installing or repairing temporary track supports |
Check compliance between work and job specifications |
Complete documentation related to the installation or repair of temporary track supports |
Operate communication equipment to required protocol |
Promptly report and/or rectify any identified problems, faults or malfunctions that may occur when installing or repairing temporary track supports in accordance with regulatory requirements and workplace procedures |
Monitor work activities in terms of planned schedule |
Modify activities depending on differing operational contingencies, risk situations and environments |
Select and use required personal protective equipment |
Select and use relevant equipment and tools |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package. | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying: the underpinning knowledge and skills relevant legislation and workplace procedures other relevant aspects of the range statement Assessment must include exercises which demonstrate competent performance of the following in a range of situations: planning work requirements organising plant, materials and equipment for a range of jobs installing and/or repairing a range of temporary supports |
Context of and specific resources for assessment | Performance is demonstrated consistently over a period of time and in a suitable range of contexts Resources for assessment include: a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or access to an appropriate range of relevant operational situations in the workplace In both real and simulated environments, access is required to: relevant and appropriate materials and equipment, and applicable documentation including workplace procedures, regulations, codes of practice and operation manuals |
Method of assessment | Assessment of this unit must be undertaken by a registered training organisation As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests Practical assessment must occur: through activities in an appropriately simulated environment at the registered training organisation, and/or in an appropriate range of situations in the workplace |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. | |
Operations may be conducted: | by day or night in all weather conditions |
Work may be conducted in: | restricted spaces exposed conditions controlled or open environments |
Work may involve: | exposure to chemicals, and dangerous or hazardous substances movements of equipment, goods and vehicles |
Equipment may include: | front end loaders, back hoes, cranes manual tools including bars, hammers and spanners small power tools chainsaw compression borer compaction equipment such as rollers and wacker packer oxy and cutting equipment scaffolding ladders elevated work platform (EWP) |
Support structures may include: | overpinning/track baulks underpinning pig sties temporary bridge support |
Liaison may include: | internal/external personnel from other work areas (e.g. train controllers) road authorities local councils landowners |
Communications systems may include: | two-way radios telephones/mobile phones agreed audible or hand signals |
Depending on work context, safety and personal protective equipment may include: | high visibility clothing hearing protection gloves sunscreen sunglasses safety glasses insect repellent safety headwear safety footwear portable radios/mobile phone hand lamps flags safety devices |
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include: | company procedures enterprise procedures organisational procedures established procedures |
Information/documents may include: | operational instructions, policies and workplace procedures local authority regulations and procedures work orders technical instructions manufacturers or workplace equipment instructions and operation manuals emergency procedure manuals two-way radio/mobile phone operation procedures QA plans, data and document control conditions of service, legislation and industrial agreements including workplace agreements and awards |
Applicable procedures and codes may include: | legislated rail safety requirements including applicable acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines relevant state/territory regulations, codes of practice and safeworking system requirements relevant Australian Standards and related requirements, including AS 4292 relevant state/territory OH&S legislation relevant state/territory environmental protection legislation |
Sectors
Not Applicable
Employability Skills
This unit contains employability skills. |
Licensing Information
Refer to Unit Descriptor