This unit involves the skills and knowledge required for the collection of data and the calculation of the efficiency of power generation plant associated with the thermal steam cycle.

Data collection is the process of gathering and measuring information systematically so that outcomes can be evaluated and calculations undertaken to ensure the efficiency of all plant associated with the thermal steam cycle in a power generation facility.

Competency in this unit requires the ability to plan for plant in-service checks, carry out in-service electrical checks, carry out corrective actions and complete work. Individuals will, in general, work as a maintenance operative in a power generation facility.

Power generation maintenance personnel are typically trained and authorised to receive permits to work

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Note: Workplace practice

The application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Collect data

1.1

Information is collected, in accordance with workplace procedures, legislative requirements, industry standards and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations

1.2

Thermal steam cycle plant is identified and its' status is established

1.3`

Tools and equipment are identified and acquired, in accordance with workplace procedures

1.4

Specialist assistance or equipment is sought, if required

1.5

Information is recorded, in accordance with workplace procedures

2

Perform calculations

2.1

Calculations are performed, in accordance with workplace procedures

2.2

Information on input and output is checked for accuracy

2.3

Thermal steam cycle plant performance is measured and calculated, in accordance with workplace procedures

3

Evaluate and analyse information

3.1

Analysis of technical and operational performance information is conducted to identify if abnormal operating conditions

3.2

Causes of any abnormal performance in thermal steam cycle plant is identified

3.3

Thermal steam cycle plant integrity is maintained through consultation with designated personnel and operational documentation

4

Produce report and complete work

4.1

Information and data are collated and documented, in accordance with workplace procedures

4.2

Reports are produced, in accordance with workplace procedures

4.3

Recommendations are made to appropriate personnel, in accordance with workplace procedures

4.4

Implementation of recommendations are monitored, in accordance with workplace procedures, to ensure thermal steam cycle plant efficiency

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Electricity generation

Maintenance