This unit covers the data gathering and analysis of system outages and plant failures. It includes recommending solutions and maintenance plans to ensure system security.

The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace subject to regulations for undertaking of electrical work.

Other conditions may apply under state and territory legislative and regulatory licencing requirements which must be confirmed prior to commencing this unit.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan for and coordinate the analysis and appraisal of fault and outage data

1.1

Work health and safety (WHS)/occupational health and safety (OHS) practices/procedures and environmental and sustainable energy procedures, which may influence the analysis and appraisal of fault and outage data, are reviewed and determined

1.2

Purpose of the analysis/appraisal is established and expected outcomes of the work are confirmed with appropriate personnel

1.3

Organisational established procedures on policies and specifications for the design are obtained or established with appropriate personnel

1.4

Equipment/tools and personal protective equipment (PPE) are selected and coordinated based on specified requirements and established procedures

1.5

Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes, to a quality standard and in accordance with established procedures

1.6

Risk control measures are identified, prioritised and evaluated against the work schedule

1.7

Relevant work permits are secured to coordinate the performance of work according to requirements and/or established procedures

1.8

Resources, including personnel, equipment, tools and PPE, required for the job are identified, scheduled and coordinated and confirmed safe and in technical working order

1.9

Liaison and communication issues with other/authorised personnel, authorities, clients and land owners are resolved and activities coordinated to carry out work

1.10

Site is prepared according to the work schedule and to minimise risk and damage to property, commerce and individuals in accordance with established procedures

1.11

Personnel participating in the work, including plant operators and contractors, are fully briefed and respective responsibilities coordinated and authorised, where applicable, in accordance with established procedures

1.12

Positioning of road signs, barriers and warning devices is planned in accordance with requirements

2

Carry out and coordinate the analysis and appraisal of fault and outage data

2.1

Circuit/systems modelling is used to evaluate alternative proposals as per established procedures

2.2

WHS/OHS and sustainable energy principles, functionality and practices to reduce the incidence of accidents and minimise waste are incorporated into the project in accordance with requirements and/or established procedures

2.3

Analysis/appraisal decisions are made on the basis of safety and effective outcomes according to requirements and/or established procedures

2.4

Mathematical models of solutions for system outages and plant failures are used to analyse the effectiveness of the finished project in accordance with requirements and established procedures

2.5

Technical advice is given to potential hazards, safety risks and control measures so that monitoring and preventative action can be undertaken and/or appropriate authorities consulted, where necessary, in accordance with requirements and established procedures

2.6

Essential knowledge and associated skills are applied to analyse specific data and compare it with compliance specifications to ensure completion of the project within an agreed timeframe according to requirements

2.7

Solutions to non-routine problems are identified and actioned using acquired essential knowledge and associated skills according to requirements

2.8

Quality of work is monitored against personal performance agreement and/or established organisational and professional standards

3

Complete and coordinate the analysis and appraisal of fault and outage data

3.1

Final inspections of the analysis/appraisal are undertaken to ensure they comply with all requirements and include all specifications and documentations needed to complete the design brief

3.2

Appropriate personnel are notified of completion and reports and/or completion documents are finalised

3.3

Reports and/or completion documents are submitted to relevant personnel/organisations for approval and, where applicable, statutory or regulatory approval

3.4

Approved copies of documents are issued and records are updated in accordance with established procedures

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Not applicable.

Design