The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Order installation components
|
|
Complete contract for work with customer Completed |
Evidence:
|
Order specified tinware as per planned installation Completed |
Evidence:
|
Ensure bending and rolling of pipe work meet specifications Completed |
Evidence:
|
Assemble components in transportable sections for transfer to site Completed |
Evidence:
|
Seek specialist advice for non-standard installations Completed |
Evidence:
|
Inspect and prepare installation site
|
|
Check site location, dimensions and levels Completed |
Evidence:
|
Determine work health and safety hazards, assess risks, implement controls and complete records Completed |
Evidence:
|
Report non-compliance and make alterations and corrections in consultation with the appropriate authorities Completed |
Evidence:
|
Measure installation and mark layout as per contract plans Completed |
Evidence:
|
Manufacture components in the workshop
|
|
Ensure vacuum pump guards and stands are made according to specifications Completed |
Evidence:
|
Ensure pipelines and vessels are manufactured and assembled according to installation design Completed |
Evidence:
|
Pre-wire electrical components Completed |
Evidence:
|
Complete non-milking systems as per dairy plan Completed |
Evidence:
|
Determine work health and safety hazards, assess risks and implement safe systems of manufacture Completed |
Evidence:
|
Install machine/equipment
|
|
Prepare machine/equipment components for sequential installation Completed |
Evidence:
|
Install machine/ equipment as per specifications and in co-operation with the enterprise and trade and building personnel Completed |
Evidence:
|
Carry out all work as per regulatory requirements and in compliance with the Australian Standards for Milking Equipment Installation and Performance Completed |
Evidence:
|
Determine work health and safety hazards, assess risks and implement safe systems of installation Completed |
Evidence:
|
Make modifications to standard operating procedures as required Completed |
Evidence:
|
Level, align, couple and connect machine/ equipment as per specifications, excluding electrical components Completed |
Evidence:
|
Commission test installed machine/equipment
|
|
Complete mechanical testing of machine/ equipment to ensure conformance to specifications, performance standards and other requirements such as work health and safety Completed |
Evidence:
|
Take corrective actions for machine/equipment performing below standards and manufacturer's specifications Completed |
Evidence:
|
Ensure final work quality and finish comply with established industry standards Completed |
Evidence:
|
Clean site, remove all leftover materials and waste, and ensure that site is safe Completed |
Evidence:
|
Record and report all alterations/modifications to machine/equipment to the appropriate authority Completed |
Evidence:
|