The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare combs and cutters for shearing
|
|
Combs and cutters are selected to suit fleece type and shearing conditions. Completed |
Evidence:
|
Combs and cutters are checked for serviceability and prepared in line with manufacturer's specifications and enterprise requirements. Completed |
Evidence:
|
Comb and cutter faults or malfunctions are identified and reported for repair or replacement in accordance with enterprise requirements. Completed |
Evidence:
|
Combs and cutters are cleaned prior to sharpening to enterprise requirements. Completed |
Evidence:
|
Combs and cutters are changed during the shearing operations to suit shearing conditions. Completed |
Evidence:
|
Potential and existing hazards are recognised, controlled and reported in line with Occupational Health and Safety (OHS) and organisational requirements. Completed |
Evidence:
|
Prepare handpiece for shearing
|
|
Comb and cutter are secured for shearing. Completed |
Evidence:
|
Handpiece is lubricated prior to shearing. Completed |
Evidence:
|
Tension is adjusted to suit shearing conditions and preference of the shearer. Completed |
Evidence:
|
Handpiece is checked for serviceability and prepared in line with manufacturer's specifications and enterprise requirements. Completed |
Evidence:
|
Handpiece faults or malfunctions are identified and reported for repair or replacement in line with enterprise requirements. Completed |
Evidence:
|
Prepare downtube for shearing
|
|
Downtube is checked for serviceability and prepared in line with manufacturer's specifications and enterprise requirements. Completed |
Evidence:
|
Downtube faults or malfunctions are identified and reported for repair or replacement in line with enterprise requirements. Completed |
Evidence:
|
Safety clutch is adjusted in line with manufacturer's specifications and enterprise requirements. Completed |
Evidence:
|
Downtube is adjusted in line with manufacturer's specifications and enterprise requirements. Completed |
Evidence:
|
Downtube is lubricated prior to shearing. Completed |
Evidence:
|