NTISthis.com

Evidence Guide: AURBTD001 - Service bicycle steering systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURBTD001 - Service bicycle steering systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to service bicycle steering system

  1. Job requirements are determined from workplace instructions
  2. Condition of steering system is inspected for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications
  3. Hazards associated with the work are identified and risks are managed
  4. Materials, parts, tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  5. Work area is prepared and service sequence, including post-service testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Condition of steering system is inspected for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials, parts, tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared and service sequence, including post-service testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out service of steering system

  1. Tools and equipment are used according to workplace procedures and manufacturer specifications
  2. Bicycle steering system is serviced according to job requirements, manufacturer specifications, and safety and environmental requirements
  3. Operation of serviced steering system is tested through its full range and adjustments are made as required
  4. Results and quality issues are reported to authorised personnel as required
Tools and equipment are used according to workplace procedures and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bicycle steering system is serviced according to job requirements, manufacturer specifications, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operation of serviced steering system is tested through its full range and adjustments are made as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Results and quality issues are reported to authorised personnel as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to service bicycle steering system

  1. Job requirements are determined from workplace instructions
  2. Condition of steering system is inspected for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications
  3. Hazards associated with the work are identified and risks are managed
  4. Materials, parts, tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  5. Work area is prepared and service sequence, including post-service testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Condition of steering system is inspected for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials, parts, tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared and service sequence, including post-service testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out service of steering system

  1. Tools and equipment are used according to workplace procedures and manufacturer specifications
  2. Bicycle steering system is serviced according to job requirements, manufacturer specifications, and safety and environmental requirements
  3. Operation of serviced steering system is tested through its full range and adjustments are made as required
  4. Results and quality issues are reported to authorised personnel as required
Tools and equipment are used according to workplace procedures and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bicycle steering system is serviced according to job requirements, manufacturer specifications, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operation of serviced steering system is tested through its full range and adjustments are made as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Results and quality issues are reported to authorised personnel as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to service bicycle steering system

1.1 Job requirements are determined from workplace instructions

1.2 Condition of steering system is inspected for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications

1.3 Hazards associated with the work are identified and risks are managed

1.4 Materials, parts, tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work area is prepared and service sequence, including post-service testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently

2. Carry out service of steering system

2.1 Tools and equipment are used according to workplace procedures and manufacturer specifications

2.2 Bicycle steering system is serviced according to job requirements, manufacturer specifications, and safety and environmental requirements

2.3 Operation of serviced steering system is tested through its full range and adjustments are made as required

2.4 Results and quality issues are reported to authorised personnel as required

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to service bicycle steering system

1.1 Job requirements are determined from workplace instructions

1.2 Condition of steering system is inspected for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications

1.3 Hazards associated with the work are identified and risks are managed

1.4 Materials, parts, tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.5 Work area is prepared and service sequence, including post-service testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently

2. Carry out service of steering system

2.1 Tools and equipment are used according to workplace procedures and manufacturer specifications

2.2 Bicycle steering system is serviced according to job requirements, manufacturer specifications, and safety and environmental requirements

2.3 Operation of serviced steering system is tested through its full range and adjustments are made as required

2.4 Results and quality issues are reported to authorised personnel as required

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

service and test three different bicycle steering systems according to manufacturer specifications

during work on the above three systems, service the following:

bicycle headsets

handlebars and stems.

Individuals must beable to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to servicing bicycle steering systems, including procedures for:

manually handling bicycles and their steering systems

identifying workplace hazards

using personal protective equipment (PPE)

environmental requirements, including procedures for disposing of waste materials

application, purpose and function of bicycle steering system principles

bicycle steering system components, including:

forks

headsets

handlebars and stems

techniques for servicing bicycle steering systems, including:

identification of bicycle steering components, materials and specifications

fault identification

bicycle measuring techniques

steering system servicing and adjustment techniques

steering system testing procedures

bicycle steering system terminology

types and use of tools and equipment used to service bicycle steering systems

servicing options, including:

on- and off-site servicing

servicing and adjusting steering system components

upgrading steering components.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Steering systemmust include:

forks

headsets

handlebars and stems.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

manually handling bicycles and their steering systems

identifying workplace hazards

using PPE

environmental requirements, including procedures for disposing of waste materials.