The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify and confirm the modification requirement
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Reasons for the modification are identified and confirmed with appropriate persons Completed |
Evidence:
|
Modification options are identified and reported to appropriate persons according to workplace procedures Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Legal and safety impacts of the modification are considered, as required, according to regulatory requirements Completed |
Evidence:
|
Develop and validate the modification specification
|
|
Manufacturer specifications for the existing network electronic control systems are sourced and interpreted Completed |
Evidence:
|
Criteria for selecting the modification method and evaluating the outcomes are identified and documented Completed |
Evidence:
|
Proposed modification method is identified, selected and evaluated from available options Completed |
Evidence:
|
Selected option, including material choices and processes, is developed in detail and progressively assessed against established criteria Completed |
Evidence:
|
Modification specification is documented according to workplace procedures Completed |
Evidence:
|
Apply and test the modification specification
|
|
Tools, test equipment and materials required to support the modification procedure are identified, selected and prepared for use Completed |
Evidence:
|
Selected modification method is carried out according to workplace procedures and safety requirements Completed |
Evidence:
|
Post-modification testing is carried out according to workplace procedures to confirm modification outcomes are as intended, and any problems detected as having been introduced during the modification process are rectified Completed |
Evidence:
|
Test results and other diagnostic findings are verified, as required, by using reliable alternative or optional processes Completed |
Evidence:
|
Variations needed during the modification process or as a result of testing are incorporated into the modification specification Completed |
Evidence:
|
Information and detail relating to the modification are documented and provided to the appropriate parties according to regulatory and commercial obligations Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work is to workplace expectations Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected Completed |
Evidence:
|
Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Identify and confirm the modification requirement
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Reasons for the modification are identified and confirmed with appropriate persons Completed |
Evidence:
|
Modification options are identified and reported to appropriate persons according to workplace procedures Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Legal and safety impacts of the modification are considered, as required, according to regulatory requirements Completed |
Evidence:
|
Develop and validate the modification specification
|
|
Manufacturer specifications for the existing network electronic control systems are sourced and interpreted Completed |
Evidence:
|
Criteria for selecting the modification method and evaluating the outcomes are identified and documented Completed |
Evidence:
|
Proposed modification method is identified, selected and evaluated from available options Completed |
Evidence:
|
Selected option, including material choices and processes, is developed in detail and progressively assessed against established criteria Completed |
Evidence:
|
Modification specification is documented according to workplace procedures Completed |
Evidence:
|
Apply and test the modification specification
|
|
Tools, test equipment and materials required to support the modification procedure are identified, selected and prepared for use Completed |
Evidence:
|
Selected modification method is carried out according to workplace procedures and safety requirements Completed |
Evidence:
|
Post-modification testing is carried out according to workplace procedures to confirm modification outcomes are as intended, and any problems detected as having been introduced during the modification process are rectified Completed |
Evidence:
|
Test results and other diagnostic findings are verified, as required, by using reliable alternative or optional processes Completed |
Evidence:
|
Variations needed during the modification process or as a result of testing are incorporated into the modification specification Completed |
Evidence:
|
Information and detail relating to the modification are documented and provided to the appropriate parties according to regulatory and commercial obligations Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work is to workplace expectations Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected Completed |
Evidence:
|
Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|