NTISthis.com

Evidence Guide: AURJTY001 - Repair and align motorcycle frames

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURJTY001 - Repair and align motorcycle frames

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect and measure motorcycle frame

  1. Job requirements are determined from workplace instructions
  2. Frame specifications and repair procedures are sourced and interpreted
  3. Inspection and measurement options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Inspection and measurement tools and equipment are selected and checked according to manufacturer procedures
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Frame specifications and repair procedures are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection and measurement options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection and measurement tools and equipment are selected and checked according to manufacturer procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect and measure frame

  1. Frame is inspected and repair requirements are determined according to workplace procedures and safety requirements
  2. Inspection results are compared with manufacturer specifications
  3. Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Frame is inspected and repair requirements are determined according to workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair frame

  1. Repair procedures and information are sourced and interpreted
  2. Repair options are analysed and those most appropriate to the circumstances are selected
  3. Repair tools, equipment and materials are selected and checked for serviceability
  4. Frame is repaired, replaced and adjusted according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
Repair procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Frame is repaired, replaced and adjusted according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Align frame

  1. Alignment procedures and information are sourced and interpreted
  2. Alignment options are analysed and those most appropriate to the circumstances are selected
  3. Alignment tools, equipment and materials are selected and checked according to manufacturer procedures
  4. Frame is aligned according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
Alignment procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Alignment options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Alignment tools, equipment and materials are selected and checked according to manufacturer procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Frame is aligned according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and frame is presented ready for use or stored
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and frame is presented ready for use or stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to inspect and measure motorcycle frame

  1. Job requirements are determined from workplace instructions
  2. Frame specifications and repair procedures are sourced and interpreted
  3. Inspection and measurement options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Inspection and measurement tools and equipment are selected and checked according to manufacturer procedures
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Frame specifications and repair procedures are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection and measurement options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection and measurement tools and equipment are selected and checked according to manufacturer procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect and measure frame

  1. Frame is inspected and repair requirements are determined according to workplace procedures and safety requirements
  2. Inspection results are compared with manufacturer specifications
  3. Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
Frame is inspected and repair requirements are determined according to workplace procedures and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection results are compared with manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair frame

  1. Repair procedures and information are sourced and interpreted
  2. Repair options are analysed and those most appropriate to the circumstances are selected
  3. Repair tools, equipment and materials are selected and checked for serviceability
  4. Frame is repaired, replaced and adjusted according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
Repair procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Frame is repaired, replaced and adjusted according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Align frame

  1. Alignment procedures and information are sourced and interpreted
  2. Alignment options are analysed and those most appropriate to the circumstances are selected
  3. Alignment tools, equipment and materials are selected and checked according to manufacturer procedures
  4. Frame is aligned according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
Alignment procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Alignment options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Alignment tools, equipment and materials are selected and checked according to manufacturer procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Frame is aligned according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and frame is presented ready for use or stored
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and frame is presented ready for use or stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect and measure motorcycle frame

1.1 Job requirements are determined from workplace instructions

1.2 Frame specifications and repair procedures are sourced and interpreted

1.3 Inspection and measurement options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Inspection and measurement tools and equipment are selected and checked according to manufacturer procedures

2. Inspect and measure frame

2.1 Frame is inspected and repair requirements are determined according to workplace procedures and safety requirements

2.2 Inspection results are compared with manufacturer specifications

2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair frame

3.1 Repair procedures and information are sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked for serviceability

3.4 Frame is repaired, replaced and adjusted according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems

4. Align frame

4.1 Alignment procedures and information are sourced and interpreted

4.2 Alignment options are analysed and those most appropriate to the circumstances are selected

4.3 Alignment tools, equipment and materials are selected and checked according to manufacturer procedures

4.4 Frame is aligned according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations and frame is presented ready for use or stored

5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

5.3 Tools and equipment are checked and stored according to workplace procedures

5.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect and measure motorcycle frame

1.1 Job requirements are determined from workplace instructions

1.2 Frame specifications and repair procedures are sourced and interpreted

1.3 Inspection and measurement options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Inspection and measurement tools and equipment are selected and checked according to manufacturer procedures

2. Inspect and measure frame

2.1 Frame is inspected and repair requirements are determined according to workplace procedures and safety requirements

2.2 Inspection results are compared with manufacturer specifications

2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments

3. Repair frame

3.1 Repair procedures and information are sourced and interpreted

3.2 Repair options are analysed and those most appropriate to the circumstances are selected

3.3 Repair tools, equipment and materials are selected and checked for serviceability

3.4 Frame is repaired, replaced and adjusted according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems

4. Align frame

4.1 Alignment procedures and information are sourced and interpreted

4.2 Alignment options are analysed and those most appropriate to the circumstances are selected

4.3 Alignment tools, equipment and materials are selected and checked according to manufacturer procedures

4.4 Frame is aligned according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace expectations and frame is presented ready for use or stored

5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

5.3 Tools and equipment are checked and stored according to workplace procedures

5.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

repair and align frames on two of the following motorcycles:

road fully fared

road naked

cruiser

off road

scooter.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to repairing and aligning motorcycle frames, including procedures for:

selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear

lifting and supporting motorcycles

using motorcycle frame straightening rigs

types and application of motorcycle frames, including those of:

road fully fared motorcycles

road naked motorcycles

cruiser motorcycles

off road motorcycles

scooters

principles of frame alignment and steering geometry as applied to motorcycles

frame repair procedures, including application, purpose and operation of straightening jigs

frame alignment and adjustment procedures, including procedures for checking and adjusting swing arm alignment

regulatory requirements relating to repairing and aligning motorcycle frames, including Australian Design Rules.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using personal protective equipment (PPE), including safety glasses, ear protection and safety footwear

lifting and supporting motorcycles

using motorcycle frame straightening rigs.