The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Collect event category information and analyse assembly requirements
|
|
Job requirements are determined from event category information and workplace instructions Completed |
Evidence:
|
Vehicle operating conditions are checked and clarification of specifications sought as required Completed |
Evidence:
|
Methods for assembly and preparation are sourced and interpreted and those most appropriate to the circumstances are selected Completed |
Evidence:
|
Modifications or adaptation of equipment are proposed as required Completed |
Evidence:
|
Component requirements list is prepared and communicated to appropriate persons Completed |
Evidence:
|
Procedures for minimising waste material are determined Completed |
Evidence:
|
Prepare work area and equipment
|
|
Tools and equipment are sourced and checked for safe and effective operation Completed |
Evidence:
|
Work area is cleaned and laid out for job requirements according to work safety requirements and team procedures Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Problems with work area or operation of equipment are reported to appropriate persons according to team procedures Completed |
Evidence:
|
Prepare components for assembly
|
|
Assembly procedures and information are sourced and interpreted Completed |
Evidence:
|
Components are cleaned to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components Completed |
Evidence:
|
Components are inspected for function and quality to ensure optimum use of resources Completed |
Evidence:
|
Problems with components are reported to appropriate persons according to team procedures as required Completed |
Evidence:
|
Install sub-assemblies
|
|
Sub-assemblies are inspected for quality and readiness for installation according to manufacturer specifications Completed |
Evidence:
|
Sub-assemblies are installed and fasteners tensioned according to safety requirements and manufacturer installation sequences and techniques Completed |
Evidence:
|
Checks are made to ensure accurate and complete fitting according to team procedures and manufacturer specifications Completed |
Evidence:
|
Problems with sub-assemblies are reported to appropriate persons according to team procedures as required Completed |
Evidence:
|
Install ancillary systems
|
|
Critical components are located according to function, susceptibility to damage, and ease of maintenance Completed |
Evidence:
|
Critical components are installed and fasteners tensioned according to team procedures and manufacturer specifications Completed |
Evidence:
|
Optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components is confirmed Completed |
Evidence:
|
Wiring loom, connectors, hoses, hard lines and ancillary components are installed and fasteners tensioned according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Entire installation and shield are secured to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Checks are made during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications Completed |
Evidence:
|
Problems with components are reported to appropriate persons according to team procedures as required Completed |
Evidence:
|
Conduct post-assembly checks
|
|
Vehicle fluid levels are checked and topped up as required according to team procedures and manufacturer specifications Completed |
Evidence:
|
Temporary bungs and covers are removed and engine pre-start checks are conducted Completed |
Evidence:
|
Sub-assemblies and ancillary systems are checked for correct operation Completed |
Evidence:
|
Set vehicle baseline configuration
|
|
Vehicle baseline settings are determined from team instructions, category regulations, and component supplier specifications Completed |
Evidence:
|
Level surface is established on which to place vehicle for set-up Completed |
Evidence:
|
Springs and dampers are installed according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Ride height and corner weight are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Steering angles are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Potential or existing problems are reported to appropriate persons according to team procedures as required Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected Completed |
Evidence:
|
Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Collect event category information and analyse assembly requirements
|
|
Job requirements are determined from event category information and workplace instructions Completed |
Evidence:
|
Vehicle operating conditions are checked and clarification of specifications sought as required Completed |
Evidence:
|
Methods for assembly and preparation are sourced and interpreted and those most appropriate to the circumstances are selected Completed |
Evidence:
|
Modifications or adaptation of equipment are proposed as required Completed |
Evidence:
|
Component requirements list is prepared and communicated to appropriate persons Completed |
Evidence:
|
Procedures for minimising waste material are determined Completed |
Evidence:
|
Prepare work area and equipment
|
|
Tools and equipment are sourced and checked for safe and effective operation Completed |
Evidence:
|
Work area is cleaned and laid out for job requirements according to work safety requirements and team procedures Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Problems with work area or operation of equipment are reported to appropriate persons according to team procedures Completed |
Evidence:
|
Prepare components for assembly
|
|
Assembly procedures and information are sourced and interpreted Completed |
Evidence:
|
Components are cleaned to facilitate pre-assembly inspection according to team procedures and safety and environmental requirements, and without causing damage to components Completed |
Evidence:
|
Components are inspected for function and quality to ensure optimum use of resources Completed |
Evidence:
|
Problems with components are reported to appropriate persons according to team procedures as required Completed |
Evidence:
|
Install sub-assemblies
|
|
Sub-assemblies are inspected for quality and readiness for installation according to manufacturer specifications Completed |
Evidence:
|
Sub-assemblies are installed and fasteners tensioned according to safety requirements and manufacturer installation sequences and techniques Completed |
Evidence:
|
Checks are made to ensure accurate and complete fitting according to team procedures and manufacturer specifications Completed |
Evidence:
|
Problems with sub-assemblies are reported to appropriate persons according to team procedures as required Completed |
Evidence:
|
Install ancillary systems
|
|
Critical components are located according to function, susceptibility to damage, and ease of maintenance Completed |
Evidence:
|
Critical components are installed and fasteners tensioned according to team procedures and manufacturer specifications Completed |
Evidence:
|
Optimum layout for wiring loom, connectors, hoses, hard lines and ancillary components is confirmed Completed |
Evidence:
|
Wiring loom, connectors, hoses, hard lines and ancillary components are installed and fasteners tensioned according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Entire installation and shield are secured to maximise reliability and minimise susceptibility to damage according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Checks are made during and after installation to ensure accurate and complete fitting according to team procedures and manufacturer specifications Completed |
Evidence:
|
Problems with components are reported to appropriate persons according to team procedures as required Completed |
Evidence:
|
Conduct post-assembly checks
|
|
Vehicle fluid levels are checked and topped up as required according to team procedures and manufacturer specifications Completed |
Evidence:
|
Temporary bungs and covers are removed and engine pre-start checks are conducted Completed |
Evidence:
|
Sub-assemblies and ancillary systems are checked for correct operation Completed |
Evidence:
|
Set vehicle baseline configuration
|
|
Vehicle baseline settings are determined from team instructions, category regulations, and component supplier specifications Completed |
Evidence:
|
Level surface is established on which to place vehicle for set-up Completed |
Evidence:
|
Springs and dampers are installed according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Ride height and corner weight are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Steering angles are measured and adjusted as required and according to manufacturer specifications, team procedures and safety requirements Completed |
Evidence:
|
Potential or existing problems are reported to appropriate persons according to team procedures as required Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work is to workplace expectations and vehicle is cleaned and presented ready for use Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable material is disposed of and recyclable material is collected Completed |
Evidence:
|
Tools and equipment are checked and stored, and surplus components and consumables are packed and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|