The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Implement environment regulations
|
|
Reasons for ethical environmental practice in an automotive mechanical workplace or business are identified Completed |
Evidence:
|
Environmental responsibilities of staff in an automotive mechanical workplace or business are identified Completed |
Evidence:
|
Penalties for individual breaches of legislation are identified Completed |
Evidence:
|
Waste is minimised, waste material, including sludge, solids and other wastes are sorted and stored in bins for recycling or disposal Completed |
Evidence:
|
Packaging on goods received is sorted and reused or disposed of to recycling Completed |
Evidence:
|
Monitor and avoid hazards to stormwater
|
|
No waste water or contaminants are allowed to enter stormwater systems Completed |
Evidence:
|
Surface cleaning, engine degreasing and preparation is undertaken in an impervious paved area and does not contaminate stormwater Completed |
Evidence:
|
Parts and components containing environmentally hazardous material are stored under cover in a sealed and bunded or drained treatment area Completed |
Evidence:
|
Liquid wastes are drained into storage or recycling containers Completed |
Evidence:
|
Parts washing is undertaken in an approved parts washer that does not cause contamination of stormwater or ground Completed |
Evidence:
|
Spill kit is located and used as needed to prevent stormwater contamination Completed |
Evidence:
|
Drip trays are used under vehicles when chance of spillage or leakage is present Completed |
Evidence:
|
Spills are cleaned up immediately and workplace is kept clean to prevent unintentional stormwater pollution Completed |
Evidence:
|
Hands are cleaned over drains connected to an oil/water separator or drums for collecting liquid waste Completed |
Evidence:
|
Spills are cleaned up immediately and workplace is kept clean to prevent unintentional stormwater pollution Completed |
Evidence:
|
Monitor and avoid hazards to air quality
|
|
Vehicle exhausts and emissions are minimised and not permitted to collect in the workplace Completed |
Evidence:
|
Hazards of airborne particles are monitored, minimised and contained Completed |
Evidence:
|
Hazards of gases are monitored, minimised and contained Completed |
Evidence:
|
Welding is conducting in a well-ventilated area Completed |
Evidence:
|
Monitor and avoid noise hazards
|
|
Noise generating activities are minimised and carried out within approved operating hours Completed |
Evidence:
|