The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to rebore and hone cylinder
|
|
Nature and scope of work requirements are identified and confirmed Completed |
Evidence:
|
OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work Completed |
Evidence:
|
Procedures and information such as workshop manuals and specifications, and tooling, are sourced Completed |
Evidence:
|
Method options are analysed and those most appropriate to the circumstances are selected and prepared Completed |
Evidence:
|
Technical and/or calibration requirements for boring and honing are sourced and support equipment is identified and prepared Completed |
Evidence:
|
Bore cylinder
|
|
Correct information is accessed and interpreted from manufacturer/component supplier specifications Completed |
Evidence:
|
Cylinder bore ridge is removed from cylinder bore Completed |
Evidence:
|
Cylinder bore is measured prior to boring to determine stages of cut Completed |
Evidence:
|
Cylinder block/barrel is prepared for boring Completed |
Evidence:
|
Boring machine is positioned prior to bore Completed |
Evidence:
|
Boring is carried out in accordance with enterprise procedures Completed |
Evidence:
|
Cylinders are bored without causing damage to any component or system Completed |
Evidence:
|
Cylinder bores are checked/measured with instruments to ensure compliance to specifications Completed |
Evidence:
|
Boring operations are completed to specifications Completed |
Evidence:
|
Boring operations are carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies Completed |
Evidence:
|
Hone cylinder
|
|
Correct information is accessed and interpreted from manufacturer/component supplier specifications Completed |
Evidence:
|
Cylinder is prepared for honing operation Completed |
Evidence:
|
Honing is carried out in accordance with enterprise procedures Completed |
Evidence:
|
Cylinders are honed without causing damage to any component or system Completed |
Evidence:
|
Components are checked/measured with instruments to ensure compliance to specifications Completed |
Evidence:
|
Honing operations are completed Completed |
Evidence:
|
Honing operations are carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies Completed |
Evidence:
|
Prepare cylinder block for assembly/storage
|
|
Cylinder block is thoroughly cleaned, including all galleries and surfaces Completed |
Evidence:
|
Bright surfaces are treated with a protective coating to prevent rust Completed |
Evidence:
|
Final inspection is made to ensure work is to workplace expectations Completed |
Evidence:
|
Cylinder block is prepared for assembly or stored to workplace expectations Completed |
Evidence:
|
Job card is processed in accordance with workplace procedures Completed |
Evidence:
|