The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to carry out grinding and facing operations
|
|
Nature and scope of work requirements are identified and confirmed Completed |
Evidence:
|
OH&S requirements, including individual State/Territory regulatory requirements and personal protection needs are observed throughout the work Completed |
Evidence:
|
Procedures and information such as workshop manuals and specifications, and tooling, are sourced Completed |
Evidence:
|
Method options are analysed and those most appropriate to the circumstances are selected and prepared Completed |
Evidence:
|
Technical and/or calibration requirements for grinding and facing are sourced and support equipment is identified and prepared Completed |
Evidence:
|
Carry out grinding operations
|
|
Correct information is accessed and interpreted from manufacturer/component supplier specifications Completed |
Evidence:
|
Components are measured prior to grinding to determine depth of grind Completed |
Evidence:
|
Component is positioned in grinder and clamped Completed |
Evidence:
|
Grinding is carried out in accordance with enterprise procedures Completed |
Evidence:
|
Grinding operations are completed without causing damage to any component or system Completed |
Evidence:
|
Components are checked/measured with instruments to ensure compliance with specifications Completed |
Evidence:
|
Grinding operations are completed to specifications and documentation is completed Completed |
Evidence:
|
Grinding operations are carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies Completed |
Evidence:
|
Carry out facing operations
|
|
Component is measured prior to facing to determine action to be taken Completed |
Evidence:
|
Component is positioned and clamped in face grinder Completed |
Evidence:
|
Facing is carried out in accordance with enterprise procedures Completed |
Evidence:
|
Facing operations are completed without causing damage to any component or system Completed |
Evidence:
|
Correct information is accessed and interpreted from manufacturer/component supplier specifications Completed |
Evidence:
|
Components are checked and measured with instruments to ensure compliance with specifications Completed |
Evidence:
|
Facing operations are completed to specifications Completed |
Evidence:
|
Facing operations are carried out according to industry regulations/guidelines, OH&S legislation, legislation and enterprise procedures/policies Completed |
Evidence:
|
Prepare components for assembly or storage
|
|
Work schedule documentation is completed Completed |
Evidence:
|
Components are thoroughly cleaned in galleries and surfaces Completed |
Evidence:
|
Bright surfaces are treated with a protective coating to prevent rust Completed |
Evidence:
|
Final inspection is made to ensure work is to workplace expectations Completed |
Evidence:
|
Components are cleaned and/or stored to workplace expectations Completed |
Evidence:
|
Job card is processed in accordance with workplace procedures Completed |
Evidence:
|