The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Set up machinery prior to machining
|
|
Machinery set-up is completed without causing damage to any components or systems. Completed |
Evidence:
|
Correct information is accessed and interpreted from appropriate manufacturer specifications Completed |
Evidence:
|
Material to be machined is positioned and clamped. Completed |
Evidence:
|
Correct speed and feed is selected to suit materials Completed |
Evidence:
|
Personal safety requirements including machine guards are worn and correctly positioned. Completed |
Evidence:
|
Setting up of components for machining/cutting is carried out in accordance with industry standards and manufacturer current specifications for methods, equipment used and tolerances relative to the component. Completed |
Evidence:
|
All machinery set-up activities are carried out according to industry regulations/guidelines, OH&S legislation, statutory legislation and enterprise procedures/policies Completed |
Evidence:
|
Machine components
|
|
Components are machined without causing damage to any components or equipment. Completed |
Evidence:
|
Correct information is accessed and interpreted from appropriate manufacturer specifications Completed |
Evidence:
|
Component are measured for size and finish Completed |
Evidence:
|
Size and finish are compared with specification. Completed |
Evidence:
|
Area is cleaned prior to removal from machine Completed |
Evidence:
|
Machining/cutting of components is carried out in accordance with vehicle/system manufacturer current specifications for methods, equipment used and tolerances relative to the component being machine/cut. Completed |
Evidence:
|
All machining/cutting activities are carried out according to industry regulations/guidelines, OH&S legislation, statutory legislation and enterprise procedures/policies Completed |
Evidence:
|