NTISthis.com

Evidence Guide: AURTTA007 - Inspect, service and repair pneumatic systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTA007 - Inspect, service and repair pneumatic systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect, service and repair pneumatic system

  1. Job requirements are determined from workplace instructions
  2. Inspection procedures and information are sourced and interpreted
  3. Options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect pneumatic system

  1. Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  2. Faults are identified from inspection results and causes of faults are determined
  3. Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments
Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are identified from inspection results and causes of faults are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out service and repair activities

  1. Service and repair procedures and information are sourced and interpreted
  2. Service and repair tools, equipment and materials are selected and checked
  3. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  4. Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  5. Post-repair testing is carried out according to workplace procedures
Service and repair procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and repair tools, equipment and materials are selected and checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to inspect, service and repair pneumatic system

  1. Job requirements are determined from workplace instructions
  2. Inspection procedures and information are sourced and interpreted
  3. Options are analysed and those most appropriate to the circumstances are selected
  4. Hazards associated with the work are identified and risks are managed
  5. Tools, equipment and materials are selected and checked for serviceability
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Options are analysed and those most appropriate to the circumstances are selected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and materials are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect pneumatic system

  1. Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  2. Faults are identified from inspection results and causes of faults are determined
  3. Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments
Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are identified from inspection results and causes of faults are determined

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out service and repair activities

  1. Service and repair procedures and information are sourced and interpreted
  2. Service and repair tools, equipment and materials are selected and checked
  3. Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  4. Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  5. Post-repair testing is carried out according to workplace procedures
Service and repair procedures and information are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and repair tools, equipment and materials are selected and checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Post-repair testing is carried out according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
  3. Tools and equipment are checked and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect, service and repair pneumatic system

1.1 Job requirements are determined from workplace instructions

1.2 Inspection procedures and information are sourced and interpreted

1.3 Options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools, equipment and materials are selected and checked for serviceability

2. Inspect pneumatic system

2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.2 Faults are identified from inspection results and causes of faults are determined

2.3 Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments

3. Carry out service and repair activities

3.1 Service and repair procedures and information are sourced and interpreted

3.2 Service and repair tools, equipment and materials are selected and checked

3.3 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.5 Post-repair testing is carried out according to workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to inspect, service and repair pneumatic system

1.1 Job requirements are determined from workplace instructions

1.2 Inspection procedures and information are sourced and interpreted

1.3 Options are analysed and those most appropriate to the circumstances are selected

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools, equipment and materials are selected and checked for serviceability

2. Inspect pneumatic system

2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

2.2 Faults are identified from inspection results and causes of faults are determined

2.3 Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments

3. Carry out service and repair activities

3.1 Service and repair procedures and information are sourced and interpreted

3.2 Service and repair tools, equipment and materials are selected and checked

3.3 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements

3.5 Post-repair testing is carried out according to workplace procedures

4. Complete work processes

4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected

4.3 Tools and equipment are checked and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

inspect, service and repair two different pneumatic systems, including the following components in each system:

compressors and filters

linear and rotary actuators

pipes, hoses and connectors

control valves

test above pneumatic systems, including:

adjusting and testing pneumatic components

setting up and testing compressor cut-out system

testing for system leaks.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting, servicing and repairing pneumatic systems, including procedures for working with stored pressure

environmental requirements, including procedures for trapping, storing and disposing of oils and fluids released from pneumatic systems

types and applications of pneumatic systems

pneumatic system schematic diagrams and symbols

identification, function and operation of pneumatic systems and components, including:

clamping systems

hydropneumatic intensifiers

rotary and screw compressors

linear actuators

rotary actuators

drive motors

lines, hoses and couplings

control valves

types of lubricants suitable for pneumatic systems, and their application and methods of lubrication

inspection, servicing and repair procedures for pneumatic systems

pneumatic system test and commissioning procedures

post-repair testing procedures for pneumatic systems.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for working with stored pressure

environmental requirements, including procedures for trapping, storing and disposing of oils and fluids released from pneumatic systems.