NTISthis.com

Evidence Guide: AURTTA3020 - Apply heat-induction processes

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURTTA3020 - Apply heat-induction processes

What evidence can you provide to prove your understanding of each of the following citeria?

Determine job requirements

  1. Job specifications and repair requirements are interpreted and determined from job sheet and work instructions
  2. Appropriate workplace health and safety (WHS) practices are identified and adhered to according to WHS, legislative and workplace requirements
  3. Information is accessed from appropriate source to enable induction heating to be performed according to OEM-recommended procedures
Job specifications and repair requirements are interpreted and determined from job sheet and work instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate workplace health and safety (WHS) practices are identified and adhered to according to WHS, legislative and workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information is accessed from appropriate source to enable induction heating to be performed according to OEM-recommended procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plan and prepare to undertake the work

  1. Approved induction heat range and heating methods are accessed and used according to OEM specifications on a range of materials
  2. Equipment and resources are identified and inspected for compliance with OEM and job repair specifications
  3. Relevant heat-induction procedures, repair plans, drawings and reference texts are selected according to job sheet instruction
  4. Work is planned in detail in line with vehicle specifications, heating sequence and workplace procedures
  5. Work areas are prepared according to WHS, legislative and workplace requirements
  6. Potential hazards are identified and prevention measures selected according to workplace procedures
  7. Work quality and completion details are finalised according to workplace procedures
Approved induction heat range and heating methods are accessed and used according to OEM specifications on a range of materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and resources are identified and inspected for compliance with OEM and job repair specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant heat-induction procedures, repair plans, drawings and reference texts are selected according to job sheet instruction

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned in detail in line with vehicle specifications, heating sequence and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work areas are prepared according to WHS, legislative and workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards are identified and prevention measures selected according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work quality and completion details are finalised according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct work

  1. Induction heating activities are completed without causing damage to workplace property, vehicles, systems or components
  2. Heat-induction settings are adjusted and supervised according to OEM, industry and workplace standards
  3. Repairs to damaged components are carried out according to OEM-recommended procedures and industry and workplace quality standards
Induction heating activities are completed without causing damage to workplace property, vehicles, systems or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Heat-induction settings are adjusted and supervised according to OEM, industry and workplace standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repairs to damaged components are carried out according to OEM-recommended procedures and industry and workplace quality standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up work area and maintain equipment

  1. Work area is cleaned and tidied according to workplace procedures
  2. Waste and scrap materials are removed following workplace and environmental requirements and procedures
  3. Tools and equipment are checked and faulty items are identified and tagged
  4. Equipment maintenance activities are completed according to workplace and manufacturer specifications
Work area is cleaned and tidied according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste and scrap materials are removed following workplace and environmental requirements and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and faulty items are identified and tagged

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment maintenance activities are completed according to workplace and manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.

A person who demonstrates competency in this unit must be able to:

comply with relevant legislation, regulations, standards, codes of practice and workplace policies and procedures

maintain working knowledge of current work system and practices

work and communicate effectively with others involved in the work

apply job requirements in relation to:

achieving induction heating goals

achieving work quality goals

responding positively to changing work requirements

effectively apply problem-solving techniques

modify activities to cater for variations in workplace context and environment

interpret and communicate operational information

comply with WHS requirements

conduct heat-induction processes.

Context of, and specific resources for assessment

Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.

Assessment is to occur:

using standard workplace practices and procedures

following workplace safety requirements

applying environmental constraints.

Assessment is to comply with relevant:

regulatory requirements

Australian standards

industry codes of practice.

The following resources must be made available for the assessment of this unit:

safe work environment

OEM repair specification

heat-induction equipment

workplace or simulated repair activity

hand tools.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.

Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.

Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.

Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Required Skills and Knowledge

Required skills

communication skills to:

follow OEM and job specifications

follow workplace verbal instructions

initiative and enterprise skills to recognise a workplace problem or potential problem and take action

learning skills to identify sources of information, assistance and expert knowledge to expand skills, knowledge and understanding

literacy skills to:

read and follow information in written job instructions, specifications, standard operating procedures, charts, lists, drawings and other reference documents

document heat-induction repair procedures and required parts

numeracy skills to interpret and calculate heat settings and repair measurements

planning and organising skills to:

plan work requirements and prioritise repair activities to achieve required outcomes and ensure tasks are completed on time

identify risk factors and take action to minimise them

problem-solving skills to:

refer problems outside area of responsibility to appropriate person

seek information and assistance as required to solve problems

self-management skills to:

select and use appropriate heat-induction equipment

recognise own limitations and seek advice

follow workplace policies and documentation, including industry codes of practice and procedures

teamwork skills to:

work with diverse individuals and groups

apply knowledge of own role to complete activities efficiently to support team activities and tasks

technical skills to:

use workplace tools and equipment relating to the heat-induction process

correctly use specialist tools and equipment

Required knowledge

WHS and personal safety requirements

technical documentation covering procedures, specifications, schedules and work plans

industry quality standards, including work instructions, procedures, and performance and inspection processes

cost minimisation and waste avoidance policies, procedures and practices

environmental protection requirements relating to the disposal of waste material

established communication channels and protocols

problem-identification and resolution techniques

procedures for the correct use of heat-induction equipment

safety requirements for heat-induction equipment

material types suitable for the application of heat-induction process

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

WHS requirements:

are those prescribed under legislation, regulations, codes of practice and policies and procedures

may include:

use of personal protective equipment and clothing

use of fire-fighting equipment

first aid equipment

control and elimination of hazards and risks

systems covering the use of hazardous materials and substances

manual-handling procedures, including for lifting and carrying.

Legislative requirements may include:

applicable legislation, regulations and codes of practice, including those relating to:

award and enterprise agreements

duty of care

employee relations

environment protection

industry codes of practice.

Workplace requirements may include:

environmental management: waste disposal, recycling and re-use guidelines

emergency and evacuation procedures

procedures for the use of heat-induction equipment

legal obligations

maintenance and storage procedures

WHS requirements

workplace guidelines

policies and procedures relating to own role and responsibility

instruction manuals

quality assurance guidelines

quality and continuous improvement processes and standards

recording and reporting guidelines.

Information may include:

OEM-recommended repair specifications

workplace operating procedures

customer requirements

industry codes of practice

material safety data sheets (MSDS)

state and territory WHS legislation.

Resources may include:

hand tools

heat-induction equipment

components for repair

identification of materials used by OEM in chassis and body components

job sheets, drawings and work instructions

workplace or simulated workplace.

Standards may include:

industry regulations and guidelines

OEM repair guidelines

WHS legislation

workplace quality procedures.

Environmental requirements may include:

measures to reduce pollution

waste management

noise control

dust control

clean-up management.