NTISthis.com

Evidence Guide: AURVTA005 - Clean vehicles

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTA005 - Clean vehicles

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to clean vehicle

  1. Safety and environmental requirements are sourced and interpreted
  2. Vehicle to be worked on is identified and manufacturer specifications and workplace procedures for vehicle cleaning are sourced and interpreted
  3. Potential hazards and risks associated with task are identified and reported to workplace supervisor
  4. Tools and equipment required for vehicle cleaning are identified according to manufacturer specifications
Safety and environmental requirements are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle to be worked on is identified and manufacturer specifications and workplace procedures for vehicle cleaning are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards and risks associated with task are identified and reported to workplace supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment required for vehicle cleaning are identified according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean vehicle interior and fittings

  1. Tools, equipment and materials are selected and checked according to manufacturer specifications and workplace procedures
  2. Vehicle is prepared prior to cleaning interior and fittings according to safety and environmental requirements
  3. Interior surfaces are cleaned and vacuumed using correct cleaning materials and equipment, without causing damage to components, tools or equipment
Tools, equipment and materials are selected and checked according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is prepared prior to cleaning interior and fittings according to safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Interior surfaces are cleaned and vacuumed using correct cleaning materials and equipment, without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean vehicle exterior and fittings

  1. Tools, equipment and materials are selected and checked according to manufacturer specifications
  2. Vehicle is prepared prior to cleaning exterior and fittings according to safety and environmental requirements
  3. Vehicle exterior and fittings are cleaned using correct techniques and without causing damage to components, tools or equipment
Tools, equipment and materials are selected and checked according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is prepared prior to cleaning exterior and fittings according to safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle exterior and fittings are cleaned using correct techniques and without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean engine bay

  1. Tools, equipment and materials are selected and checked according to manufacturer specifications and workplace procedures
  2. Vehicle is prepared prior to cleaning engine bay according to safety and environmental requirements
  3. Electronic components and electrical connections are protected from water ingress
  4. Engine bay is cleaned without causing damage to components, tools or equipment
Tools, equipment and materials are selected and checked according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is prepared prior to cleaning engine bay according to safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Electronic components and electrical connections are protected from water ingress

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine bay is cleaned without causing damage to components, tools or equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work is to workplace standards and vehicle is presented ready for use or storage according to workplace procedures
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
  3. Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary
  4. Problems with cleaning equipment or tools are reported according to workplace procedures
  5. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work is to workplace standards and vehicle is presented ready for use or storage according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems with cleaning equipment or tools are reported according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare to clean vehicle

1.1 Safety and environmental requirements are sourced and interpreted

1.2 Vehicle to be worked on is identified and manufacturer specifications and workplace procedures for vehicle cleaning are sourced and interpreted

1.3 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.4 Tools and equipment required for vehicle cleaning are identified according to manufacturer specifications

2. Clean vehicle interior and fittings

2.1 Tools, equipment and materials are selected and checked according to manufacturer specifications and workplace procedures

2.2 Vehicle is prepared prior to cleaning interior and fittings according to safety and environmental requirements

2.3 Interior surfaces are cleaned and vacuumed using correct cleaning materials and equipment, without causing damage to components, tools or equipment

3. Clean vehicle exterior and fittings

3.1 Tools, equipment and materials are selected and checked according to manufacturer specifications

3.2 Vehicle is prepared prior to cleaning exterior and fittings according to safety and environmental requirements

3.3 Vehicle exterior and fittings are cleaned using correct techniques and without causing damage to components, tools or equipment

4. Clean engine bay

4.1 Tools, equipment and materials are selected and checked according to manufacturer specifications and workplace procedures

4.2 Vehicle is prepared prior to cleaning engine bay according to safety and environmental requirements

4.3 Electronic components and electrical connections are protected from water ingress

4.4 Engine bay is cleaned without causing damage to components, tools or equipment

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace standards and vehicle is presented ready for use or storage according to workplace procedures

5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

5.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

5.4 Problems with cleaning equipment or tools are reported according to workplace procedures

5.5 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Prepare to clean vehicle

1.1 Safety and environmental requirements are sourced and interpreted

1.2 Vehicle to be worked on is identified and manufacturer specifications and workplace procedures for vehicle cleaning are sourced and interpreted

1.3 Potential hazards and risks associated with task are identified and reported to workplace supervisor

1.4 Tools and equipment required for vehicle cleaning are identified according to manufacturer specifications

2. Clean vehicle interior and fittings

2.1 Tools, equipment and materials are selected and checked according to manufacturer specifications and workplace procedures

2.2 Vehicle is prepared prior to cleaning interior and fittings according to safety and environmental requirements

2.3 Interior surfaces are cleaned and vacuumed using correct cleaning materials and equipment, without causing damage to components, tools or equipment

3. Clean vehicle exterior and fittings

3.1 Tools, equipment and materials are selected and checked according to manufacturer specifications

3.2 Vehicle is prepared prior to cleaning exterior and fittings according to safety and environmental requirements

3.3 Vehicle exterior and fittings are cleaned using correct techniques and without causing damage to components, tools or equipment

4. Clean engine bay

4.1 Tools, equipment and materials are selected and checked according to manufacturer specifications and workplace procedures

4.2 Vehicle is prepared prior to cleaning engine bay according to safety and environmental requirements

4.3 Electronic components and electrical connections are protected from water ingress

4.4 Engine bay is cleaned without causing damage to components, tools or equipment

5. Complete work processes

5.1 Final inspection is made to ensure work is to workplace standards and vehicle is presented ready for use or storage according to workplace procedures

5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures

5.3 Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary

5.4 Problems with cleaning equipment or tools are reported according to workplace procedures

5.5 Workplace documentation is processed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

information about key aspects of work health and safety (WHS), occupational health and safety (OHS) and environmental requirements, including:

use of personal protective equipment, including safety glasses, ear protection, gloves and safety footwear

applying procedures for preventing waste water from entering storm water systems.

Vehicle must include one or more of the following:

passenger motor vehicle

light commercial

heavy vehicle

motor cycle

constructed vehicle.

Tools and equipment must include:

hoses and washing equipment

chemicals and cleaning solutions

polishing equipment.

Interior surfaces must include:

cloth

glass

leather.