The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to remove and replace adhesive attached components on vehicles
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures Completed |
Evidence:
|
Mouldings and decals are sourced and inspected for quality Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability Completed |
Evidence:
|
Work is planned and removal and replacement procedures are identified to prevent damage to vehicle Completed |
Evidence:
|
Remove adhesive attached components on vehicles
|
|
Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns Completed |
Evidence:
|
Reusable adhesive attached components are inspected and cleaned in preparation for replacement Completed |
Evidence:
|
Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components Completed |
Evidence:
|
Attach adhesive components on vehicles
|
|
Components to be replaced are checked and confirmed to be within manufacturer specifications Completed |
Evidence:
|
Adhesive is selected and applied according to product specification Completed |
Evidence:
|
Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Prepare to remove and replace adhesive attached components on vehicles
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures Completed |
Evidence:
|
Mouldings and decals are sourced and inspected for quality Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability Completed |
Evidence:
|
Work is planned and removal and replacement procedures are identified to prevent damage to vehicle Completed |
Evidence:
|
Remove adhesive attached components on vehicles
|
|
Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns Completed |
Evidence:
|
Reusable adhesive attached components are inspected and cleaned in preparation for replacement Completed |
Evidence:
|
Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components Completed |
Evidence:
|
Attach adhesive components on vehicles
|
|
Components to be replaced are checked and confirmed to be within manufacturer specifications Completed |
Evidence:
|
Adhesive is selected and applied according to product specification Completed |
Evidence:
|
Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|