NTISthis.com

Evidence Guide: AURVTN005 - Remove and replace adhesive attached components on vehicles

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTN005 - Remove and replace adhesive attached components on vehicles

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to remove and replace adhesive attached components on vehicles

  1. Job requirements are determined from workplace instructions
  2. Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures
  3. Mouldings and decals are sourced and inspected for quality
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability
  6. Work is planned and removal and replacement procedures are identified to prevent damage to vehicle
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mouldings and decals are sourced and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned and removal and replacement procedures are identified to prevent damage to vehicle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove adhesive attached components on vehicles

  1. Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns
  2. Reusable adhesive attached components are inspected and cleaned in preparation for replacement
  3. Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components
Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Reusable adhesive attached components are inspected and cleaned in preparation for replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attach adhesive components on vehicles

  1. Components to be replaced are checked and confirmed to be within manufacturer specifications
  2. Adhesive is selected and applied according to product specification
  3. Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles
Components to be replaced are checked and confirmed to be within manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive is selected and applied according to product specification

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to remove and replace adhesive attached components on vehicles

  1. Job requirements are determined from workplace instructions
  2. Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures
  3. Mouldings and decals are sourced and inspected for quality
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability
  6. Work is planned and removal and replacement procedures are identified to prevent damage to vehicle
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mouldings and decals are sourced and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned and removal and replacement procedures are identified to prevent damage to vehicle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove adhesive attached components on vehicles

  1. Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns
  2. Reusable adhesive attached components are inspected and cleaned in preparation for replacement
  3. Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components
Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Reusable adhesive attached components are inspected and cleaned in preparation for replacement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attach adhesive components on vehicles

  1. Components to be replaced are checked and confirmed to be within manufacturer specifications
  2. Adhesive is selected and applied according to product specification
  3. Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles
Components to be replaced are checked and confirmed to be within manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adhesive is selected and applied according to product specification

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and replace adhesive attached components on vehicles

1.1 Job requirements are determined from workplace instructions

1.2 Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures

1.3 Mouldings and decals are sourced and inspected for quality

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability

1.6 Work is planned and removal and replacement procedures are identified to prevent damage to vehicle

2. Remove adhesive attached components on vehicles

2.1 Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns

2.2 Reusable adhesive attached components are inspected and cleaned in preparation for replacement

2.3 Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components

3. Attach adhesive components on vehicles

3.1 Components to be replaced are checked and confirmed to be within manufacturer specifications

3.2 Adhesive is selected and applied according to product specification

3.3 Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles

4. Complete work processes

4.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to remove and replace adhesive attached components on vehicles

1.1 Job requirements are determined from workplace instructions

1.2 Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures

1.3 Mouldings and decals are sourced and inspected for quality

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability

1.6 Work is planned and removal and replacement procedures are identified to prevent damage to vehicle

2. Remove adhesive attached components on vehicles

2.1 Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns

2.2 Reusable adhesive attached components are inspected and cleaned in preparation for replacement

2.3 Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components

3. Attach adhesive components on vehicles

3.1 Components to be replaced are checked and confirmed to be within manufacturer specifications

3.2 Adhesive is selected and applied according to product specification

3.3 Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles

4. Complete work processes

4.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

remove and replace three of the following adhesive attached components on vehicles:

protector mouldings

badges

transfers

decals.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and replacing adhesive attached components on vehicles, including procedures for:

selecting and using personal protective equipment (PPE)

using manual handling and storage techniques

using tools and equipment

handling and storing adhesives

environmental requirements, including procedures for trapping, storing and disposing of waste materials

methods and techniques for removing different types of adhesive attached components, including suitable removal methods and tools

methods and techniques for replacing different types of adhesive attached components, including:

fastening methods: adhesive and mechanical methods

types and application of adhesives

procedures for final inspection of replaced adhesive attached components.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Adhesive attached components must include:

protector mouldings

badges

transfers

decals

attachment clips.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using manual handling and storage techniques

using tools and equipment

handling and storing adhesives

environmental requirements, including procedures for trapping, storing and disposing of waste materials.

must include:

attaching mouldings using two-way adhesive tape

attaching transfers and decals following product replacement instructions.

Product specification must include:

type

method

thickness.