NTISthis.com

Evidence Guide: AURVTN008 - Clean vehicle body and door openings

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTN008 - Clean vehicle body and door openings

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to clean vehicle body and door openings

  1. Job requirements are determined from workplace instructions
  2. Vehicle manufacturer’s recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted
  3. Cleaning products are selected and inspected for quality and suitability
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability
  6. Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle manufacturer’s recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cleaning products are selected and inspected for quality and suitability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wash and clean vehicle

  1. Vehicle body exterior is washed and cleaned according to workplace procedures and customer requirements
  2. Vehicle openings, bonnet surrounds, and sill panels are washed and cleaned according to workplace procedures and customer requirements
  3. Equipment and cleaning and protection products are used according to vehicle manufacturer recommendations, workplace procedures, and safety and environmental requirements
  4. Washing and cleaning are completed according to workplace procedures and environmental requirements, and without causing damage to vehicle electrical and fuel components
Vehicle body exterior is washed and cleaned according to workplace procedures and customer requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle openings, bonnet surrounds, and sill panels are washed and cleaned according to workplace procedures and customer requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and cleaning and protection products are used according to vehicle manufacturer recommendations, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Washing and cleaning are completed according to workplace procedures and environmental requirements, and without causing damage to vehicle electrical and fuel components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to clean vehicle body and door openings

  1. Job requirements are determined from workplace instructions
  2. Vehicle manufacturer’s recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted
  3. Cleaning products are selected and inspected for quality and suitability
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability
  6. Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle manufacturer’s recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cleaning products are selected and inspected for quality and suitability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wash and clean vehicle

  1. Vehicle body exterior is washed and cleaned according to workplace procedures and customer requirements
  2. Vehicle openings, bonnet surrounds, and sill panels are washed and cleaned according to workplace procedures and customer requirements
  3. Equipment and cleaning and protection products are used according to vehicle manufacturer recommendations, workplace procedures, and safety and environmental requirements
  4. Washing and cleaning are completed according to workplace procedures and environmental requirements, and without causing damage to vehicle electrical and fuel components
Vehicle body exterior is washed and cleaned according to workplace procedures and customer requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle openings, bonnet surrounds, and sill panels are washed and cleaned according to workplace procedures and customer requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and cleaning and protection products are used according to vehicle manufacturer recommendations, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Washing and cleaning are completed according to workplace procedures and environmental requirements, and without causing damage to vehicle electrical and fuel components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to clean vehicle body and door openings

1.1 Job requirements are determined from workplace instructions

1.2 Vehicle manufacturer’s recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted

1.3 Cleaning products are selected and inspected for quality and suitability

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability

1.6 Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle

2. Wash and clean vehicle

2.1 Vehicle body exterior is washed and cleaned according to workplace procedures and customer requirements

2.2 Vehicle openings, bonnet surrounds, and sill panels are washed and cleaned according to workplace procedures and customer requirements

2.3 Equipment and cleaning and protection products are used according to vehicle manufacturer recommendations, workplace procedures, and safety and environmental requirements

2.4 Washing and cleaning are completed according to workplace procedures and environmental requirements, and without causing damage to vehicle electrical and fuel components

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to clean vehicle body and door openings

1.1 Job requirements are determined from workplace instructions

1.2 Vehicle manufacturer’s recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted

1.3 Cleaning products are selected and inspected for quality and suitability

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability

1.6 Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle

2. Wash and clean vehicle

2.1 Vehicle body exterior is washed and cleaned according to workplace procedures and customer requirements

2.2 Vehicle openings, bonnet surrounds, and sill panels are washed and cleaned according to workplace procedures and customer requirements

2.3 Equipment and cleaning and protection products are used according to vehicle manufacturer recommendations, workplace procedures, and safety and environmental requirements

2.4 Washing and cleaning are completed according to workplace procedures and environmental requirements, and without causing damage to vehicle electrical and fuel components

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

wash and clean vehicle body and door openings on six different vehicles.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to cleaning vehicle body and door openings, including procedures for:

selecting and using personal protective equipment (PPE)

using tools and equipment

using safety data sheets (SDS) for cleaning products

handling and storing cleaning material

environmental requirements, including procedures for trapping, storing and disposing of waste materials and cleaning chemicals

methods and techniques for:

preparing and applying detailing and cleaning products

using cleaning and washing equipment

methods for protecting vehicles while cleaning vehicle body exterior and door openings

procedures for final inspection of vehicle body and door openings.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using tools and equipment

using SDS for cleaning products

handling and storing cleaning material

environmental requirements, including procedures for trapping, storing and disposing of waste materials and cleaning chemicals.