The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to repair corroded panel sections
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Repair material is selected and checked for quality Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Tools and equipment are selected and checked for serviceability Completed |
Evidence:
|
Work is planned to identify repair methods, minimise waste, and use time efficiently Completed |
Evidence:
|
Remove corroded sections
|
|
Corroded vehicle body panel and components are identified Completed |
Evidence:
|
Body section is assessed to determine appropriate repair method Completed |
Evidence:
|
Corroded panel is removed according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle or components Completed |
Evidence:
|
Assistance is sought from authorised personnel where removal of components disturbs vehicle trim or electrical, mechanical or air conditioning systems Completed |
Evidence:
|
Reform and replace corroded sections
|
|
Repair material is selected according to vehicle manufacturer specifications Completed |
Evidence:
|
Corroded panel section is measured and formed use forming equipment Completed |
Evidence:
|
Panel section is repaired or reformed using approved methods and equipment Completed |
Evidence:
|
Repaired corroded section is replaced, welded and finished Completed |
Evidence:
|
Replaced section is checked for compliance against vehicle manufacturer specifications Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and panel is presented ready for painting Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Prepare to repair corroded panel sections
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Repair material is selected and checked for quality Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Tools and equipment are selected and checked for serviceability Completed |
Evidence:
|
Work is planned to identify repair methods, minimise waste, and use time efficiently Completed |
Evidence:
|
Remove corroded sections
|
|
Corroded vehicle body panel and components are identified Completed |
Evidence:
|
Body section is assessed to determine appropriate repair method Completed |
Evidence:
|
Corroded panel is removed according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle or components Completed |
Evidence:
|
Assistance is sought from authorised personnel where removal of components disturbs vehicle trim or electrical, mechanical or air conditioning systems Completed |
Evidence:
|
Reform and replace corroded sections
|
|
Repair material is selected according to vehicle manufacturer specifications Completed |
Evidence:
|
Corroded panel section is measured and formed use forming equipment Completed |
Evidence:
|
Panel section is repaired or reformed using approved methods and equipment Completed |
Evidence:
|
Repaired corroded section is replaced, welded and finished Completed |
Evidence:
|
Replaced section is checked for compliance against vehicle manufacturer specifications Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and panel is presented ready for painting Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|