The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Locate OEM or authorised agency repair procedures
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
OEM or authorised agency repair procedures are sourced, interpreted and incorporated into planning process Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Recommended repair tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability Completed |
Evidence:
|
Work is planned to identify required HSS repair methods, minimise waste, and use time efficiently Completed |
Evidence:
|
Repair or replace HSS components
|
|
Sections not subject to repair are protected, using approved methods and equipment Completed |
Evidence:
|
HSS sections to be replaced are identified and removed using OEM or authorised agency recommended removal methods and equipment, workplace procedures, and safety and environmental requirements Completed |
Evidence:
|
Damaged surfaces are restored to a condition suitable for fitting replacement HSS components Completed |
Evidence:
|
Vehicle measuring or jigging equipment is used to position replacement HSS component correctly according to OEM or authorised agency specifications Completed |
Evidence:
|
OEM or authorised agency’s surface coatings is protected or reapplied Completed |
Evidence:
|
Replacement HSS components are aligned and secured within OEM or authorised agency’s tolerances Completed |
Evidence:
|
Weld HSS components
|
|
Recommended welding equipment for HSS is located and checked for correct operation Completed |
Evidence:
|
Sample welds are conducted using recommended welding techniques, inspected, and destruction tested for defects according to workplace instructions Completed |
Evidence:
|
HSS components are refitted using recommended repair methods, materials and equipment, and without causing damage to other systems or components Completed |
Evidence:
|
Grinding procedures are followed according to OEM or authorised agency and weld material specifications Completed |
Evidence:
|
Complete work processes
|
|
Repairs to HSS components are finished to pre-paint condition according to workplace and OEM or authorised agency repair procedures Completed |
Evidence:
|
Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and components are presented ready for painting Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, tagged and reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Locate OEM or authorised agency repair procedures
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
OEM or authorised agency repair procedures are sourced, interpreted and incorporated into planning process Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Recommended repair tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability Completed |
Evidence:
|
Work is planned to identify required HSS repair methods, minimise waste, and use time efficiently Completed |
Evidence:
|
Repair or replace HSS components
|
|
Sections not subject to repair are protected, using approved methods and equipment Completed |
Evidence:
|
HSS sections to be replaced are identified and removed using OEM or authorised agency recommended removal methods and equipment, workplace procedures, and safety and environmental requirements Completed |
Evidence:
|
Damaged surfaces are restored to a condition suitable for fitting replacement HSS components Completed |
Evidence:
|
Vehicle measuring or jigging equipment is used to position replacement HSS component correctly according to OEM or authorised agency specifications Completed |
Evidence:
|
OEM or authorised agency’s surface coatings is protected or reapplied Completed |
Evidence:
|
Replacement HSS components are aligned and secured within OEM or authorised agency’s tolerances Completed |
Evidence:
|
Weld HSS components
|
|
Recommended welding equipment for HSS is located and checked for correct operation Completed |
Evidence:
|
Sample welds are conducted using recommended welding techniques, inspected, and destruction tested for defects according to workplace instructions Completed |
Evidence:
|
HSS components are refitted using recommended repair methods, materials and equipment, and without causing damage to other systems or components Completed |
Evidence:
|
Grinding procedures are followed according to OEM or authorised agency and weld material specifications Completed |
Evidence:
|
Complete work processes
|
|
Repairs to HSS components are finished to pre-paint condition according to workplace and OEM or authorised agency repair procedures Completed |
Evidence:
|
Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and components are presented ready for painting Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, tagged and reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|