Set up and operate universal measuring systems Evidence Guide

NTISthis.com

Evidence Guide: AURVTN3029 - Set up and operate universal measuring systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

AURVTN3029 - Set up and operate universal measuring systems

What evidence can you provide to prove your understanding of each of the following citeria?

Determine job requirements

Job specifications and requirements are interpreted and determined from job sheets and work instructions
Appropriate workplace health and safety (WHS) practices are identified according to WHS, legislative and workplace requirements
Measurement equipment information is interpreted for correct set-up and operation
Vehicle chassis specifications are obtained from OEM or other recognised industry agencies

Job specifications and requirements are interpreted and determined from job sheets and work instructions

Completed
Date:

Teacher:

Evidence:

Appropriate workplace health and safety (WHS) practices are identified according to WHS, legislative and workplace requirements

Completed
Date:

Teacher:

Evidence:

Measurement equipment information is interpreted for correct set-up and operation

Completed
Date:

Teacher:

Evidence:

Vehicle chassis specifications are obtained from OEM or other recognised industry agencies

Completed
Date:

Teacher:

Evidence:

Plan and prepare work

OEM processes and specifications are read and incorporated into the development of a repair plan
Vehicle specifications and recommended repair procedures are sourced using the internet or repair manuals
Equipment and resources are checked for OEM compliance
Relevant set-up procedures, repair plans, drawings and reference texts are followed according to job instructions
Work is planned to include equipment set-up and operation to specifications and workplace procedures
Work area is prepared according to WHS, legislative and workplace requirements
Potential hazards are identified and prevention measures selected according to workplace procedures

OEM processes and specifications are read and incorporated into the development of a repair plan

Completed
Date:

Teacher:

Evidence:

Vehicle specifications and recommended repair procedures are sourced using the internet or repair manuals

Completed
Date:

Teacher:

Evidence:

Equipment and resources are checked for OEM compliance

Completed
Date:

Teacher:

Evidence:

Relevant set-up procedures, repair plans, drawings and reference texts are followed according to job instructions

Completed
Date:

Teacher:

Evidence:

Work is planned to include equipment set-up and operation to specifications and workplace procedures

Completed
Date:

Teacher:

Evidence:

Work area is prepared according to WHS, legislative and workplace requirements

Completed
Date:

Teacher:

Evidence:

Potential hazards are identified and prevention measures selected according to workplace procedures

Completed
Date:

Teacher:

Evidence:

Conduct work

Equipment set-up activities are completed without causing damage to workplace property, vehicles, systems or components
Measuring system is secured and adjusted to vehicle according to equipment manufacturer recommended procedures
Vehicle measurements are taken in three dimensions and repairs are carried out according to OEM procedures and workplace quality procedures

Equipment set-up activities are completed without causing damage to workplace property, vehicles, systems or components

Completed
Date:

Teacher:

Evidence:

Measuring system is secured and adjusted to vehicle according to equipment manufacturer recommended procedures

Completed
Date:

Teacher:

Evidence:

Vehicle measurements are taken in three dimensions and repairs are carried out according to OEM procedures and workplace quality procedures

Completed
Date:

Teacher:

Evidence:

Clean up work area and maintain equipment

Waste and scrap are removed following workplace and environmental requirements and procedures
Equipment and work area are cleaned and inspected for serviceable condition according to workplace procedures
Faulty equipment is identified and tagged according to workplace policy
Maintenance activities are completed according to manufacturer and component specifications and workplace procedures
Measuring equipment is maintained and stored according to workplace procedures

Waste and scrap are removed following workplace and environmental requirements and procedures

Completed
Date:

Teacher:

Evidence:

Equipment and work area are cleaned and inspected for serviceable condition according to workplace procedures

Completed
Date:

Teacher:

Evidence:

Faulty equipment is identified and tagged according to workplace policy

Completed
Date:

Teacher:

Evidence:

Maintenance activities are completed according to manufacturer and component specifications and workplace procedures

Completed
Date:

Teacher:

Evidence:

Measuring equipment is maintained and stored according to workplace procedures

Completed
Date:

Teacher:

Evidence:

Finalise measurement processes

Pre- and post-repair measurement readings that comply with OEM specifications, industry and workplace standards are recorded
Vehicle dimensions are recorded for customer, insurance and workplace evidence
Work completion details are finalised according to workplace procedures

Pre- and post-repair measurement readings that comply with OEM specifications, industry and workplace standards are recorded

Completed
Date:

Teacher:

Evidence:

Vehicle dimensions are recorded for customer, insurance and workplace evidence

Completed
Date:

Teacher:

Evidence:

Work completion details are finalised according to workplace procedures

Completed
Date:

Teacher:

Evidence:

Assessed

Teacher: ___________________________ Date: _

Signature: ________________________________________________

Comments:

Instructions to Assessors

Evidence Guide


The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit	The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge. A person who demonstrates competency in this unit must be able to: comply with relevant legislation, regulations, standards, codes of practice and established safe practices and workplace policies and procedures for managing personal work priorities maintain working knowledge of current work systems and practices apply, within scope of own role, the requirements of the job or work role: set up and operate universal measuring systems measure upper and under-body measure three dimensions measure diamond and twist damage effectively apply problem-solving techniques interpret and communicate equipment operational information employ safe work practices conduct pre- and post-vehicle measuring processes use universal measuring system and relevant tools and equipment.
Context of, and specific resources for assessment	Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting. Assessment is to occur: using standard workplace practices and procedures following safety requirements applying environmental constraints. Assessment is to comply with relevant: regulatory requirements Australian standards industry codes of practice. The following resources must be made available for the assessment of this unit: safe work environment OEM specification universal measuring equipment workplace or simulated measuring activity hand tools.
Method of assessment	Assessment must satisfy the endorsed Assessment Guidelines of this Training Package. Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge. Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application. Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role. Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients. Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Required Skills and Knowledge

Required skills

communication skills to follow workplace verbal instructions

initiative and enterprise skills to recognise a workplace problem or potential problem and take action

learning skills to identify sources of information, assistance and expert knowledge to expand skills and understanding

literacy skills to:

read and follow information in written job instructions, specifications, standard operating procedures, charts, lists, drawings and other reference documents

obtain and record vehicle specifications and repair procedures

document pre- and post-vehicle measuring results

numeracy skills to interpret, calculate vehicle measuring equipment

planning and organising skills to:

plan measuring equipment set-up

plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed on time

identify risk factors and take action to minimise them

problem-solving skills to:

refer problems outside area of responsibility to appropriate person

seek information and assistance as required to solve problems

self-management skills to:

select and use appropriate universal measuring equipment and tools

recognise own limitations and seek advice

follow workplace policies and documentation, such as industry codes of practice and procedures

technical skills to:

use workplace tools and equipment relating to the set-up and operation of universal measuring systems

use universal measuring equipment correctly

teamwork skills to apply knowledge of own role to complete activities efficiently to support team activities and tasks

Required knowledge

relevant workplace health and safety and environmental regulations and workplace policies and procedures

workplace technical documentation covering procedures, specifications, schedules and work plans or equivalent

workplace quality system documentation covering instructions, procedures, performance indicators and review processes or equivalent

environmental protection requirements relating to the disposal of waste material

established communication channels and protocols

problem-identification and resolution techniques

procedures for operating universal measuring equipment

universal measuring equipment safety requirements

Range Statement


The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Workplace health and safety requirements may include:	legislation and regulations workplace safety policies and procedures use of personal protective equipment and clothing use of fire-fighting equipment first aid equipment hazard and risk control and elimination systems covering the use of hazardous materials and substances manual-handling procedures, including for lifting and carrying.
Legislative requirements may include:	applicable legislation and regulations, including those relating to: award and enterprise agreements duty of care employee relations environment protection industrial relations.
Workplace requirements may include:	environmental management: waste disposal, recycling and re-use guidelines emergency and evacuation procedures legal obligations maintenance and storage procedures WHS requirements policies and procedures relating to own role and responsibility procedures for using universal measuring equipment instruction manuals quality assurance guidelines quality and continuous improvement processes and standards recording and reporting guidelines.
Information may include:	OEM-recommended repair specifications workplace operating procedures customer requirements industry codes of practice legislation.
Resources may include:	measuring equipment set-up specifications hand tools identification of OEM chassis attachment points job sheets overhead measuring system laser measuring system trammel bar parallel gauges mechanical measuring system computer-aided measuring system tape measure working drawings work instructions workplace supervisor or trainer workplace or simulated workplace.
Standards may include:	industry regulations and guidelines OEM repair guidelines OEM vehicle specifications industry codes of practice WHS legislation workplace quality procedures.

NTISthis.com

Evidence Guide: AURVTN3029 - Set up and operate universal measuring systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

AURVTN3029 - Set up and operate universal measuring systems

Determine job requirements

Plan and prepare work

Conduct work

Clean up work area and maintain equipment

Finalise measurement processes

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

Instructions to Assessors

Teacher: ___________________________ Date: _