The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to mix and apply COB multi-layer and pearl refinishing materials
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Vehicle paint specifications, technical data sheets (TDS) and paint safety data sheets (SDS) are accessed and interpreted Completed |
Evidence:
|
Refinishing materials are selected and inspected for quality Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Refinishing tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability Completed |
Evidence:
|
Work is planned to identify mixing and application methods for COB multi-layer and pearl paint, minimise waste, prevent damage to vehicle and use time efficiently Completed |
Evidence:
|
Mix COB multi-layer and pearl refinishing materials
|
|
Refinishing materials are calculated and mixed according to paint manufacturer specifications, formulas and codes Completed |
Evidence:
|
Codes and information relevant to job requirement are recorded accurately Completed |
Evidence:
|
Mixing activities are carried out according to workplace procedures and safety and environmental requirements Completed |
Evidence:
|
COB multi-layer and pearl paints are mixed without causing damage to components or systems Completed |
Evidence:
|
Apply COB multi-layer and pearl refinishing materials
|
|
Refinishing materials are applied using manufacturer recommended method and intervals according to safety and environmental requirements Completed |
Evidence:
|
Refinishing materials are dried using approved methods and equipment Completed |
Evidence:
|
Refinishing techniques are used to ensure painted surface meets specifications Completed |
Evidence:
|
Paint surface faults are rectified using compounds, polishes and glazes to blend rectified areas with existing paintwork Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Prepare to mix and apply COB multi-layer and pearl refinishing materials
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Vehicle paint specifications, technical data sheets (TDS) and paint safety data sheets (SDS) are accessed and interpreted Completed |
Evidence:
|
Refinishing materials are selected and inspected for quality Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Refinishing tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability Completed |
Evidence:
|
Work is planned to identify mixing and application methods for COB multi-layer and pearl paint, minimise waste, prevent damage to vehicle and use time efficiently Completed |
Evidence:
|
Mix COB multi-layer and pearl refinishing materials
|
|
Refinishing materials are calculated and mixed according to paint manufacturer specifications, formulas and codes Completed |
Evidence:
|
Codes and information relevant to job requirement are recorded accurately Completed |
Evidence:
|
Mixing activities are carried out according to workplace procedures and safety and environmental requirements Completed |
Evidence:
|
COB multi-layer and pearl paints are mixed without causing damage to components or systems Completed |
Evidence:
|
Apply COB multi-layer and pearl refinishing materials
|
|
Refinishing materials are applied using manufacturer recommended method and intervals according to safety and environmental requirements Completed |
Evidence:
|
Refinishing materials are dried using approved methods and equipment Completed |
Evidence:
|
Refinishing techniques are used to ensure painted surface meets specifications Completed |
Evidence:
|
Paint surface faults are rectified using compounds, polishes and glazes to blend rectified areas with existing paintwork Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|