NTISthis.com

Evidence Guide: AURVTT004 - Trim vehicle components

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTT004 - Trim vehicle components

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Job requirements are determined from workplace instructions
  2. Trim materials are selected and inspected for quality
  3. Safety data sheets (SDS) are sourced and interpreted
  4. Hazards associated with the work are identified and risks are managed
  5. Trim tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  6. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim materials are selected and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety data sheets (SDS) are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measure, mark, cut and fabricate trim

  1. Material patterns are developed and prepared for use
  2. Trim materials are measured, marked and cut according to workplace instructions and prepared pattern
  3. Trimming tools and equipment are used according to workplace procedures and safety and environmental requirements
  4. Trim is fabricated according to work instructions and job requirements
Material patterns are developed and prepared for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim materials are measured, marked and cut according to workplace instructions and prepared pattern

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trimming tools and equipment are used according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim is fabricated according to work instructions and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attach trim

  1. Trim materials are fitted and checked for alignment, appearance and quality according to job specifications and workplace instructions
  2. Trim materials are attached to vehicle component and checked against specifications
Trim materials are fitted and checked for alignment, appearance and quality according to job specifications and workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim materials are attached to vehicle component and checked against specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable materials is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable materials is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for work

  1. Job requirements are determined from workplace instructions
  2. Trim materials are selected and inspected for quality
  3. Safety data sheets (SDS) are sourced and interpreted
  4. Hazards associated with the work are identified and risks are managed
  5. Trim tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  6. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim materials are selected and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety data sheets (SDS) are sourced and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measure, mark, cut and fabricate trim

  1. Material patterns are developed and prepared for use
  2. Trim materials are measured, marked and cut according to workplace instructions and prepared pattern
  3. Trimming tools and equipment are used according to workplace procedures and safety and environmental requirements
  4. Trim is fabricated according to work instructions and job requirements
Material patterns are developed and prepared for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim materials are measured, marked and cut according to workplace instructions and prepared pattern

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trimming tools and equipment are used according to workplace procedures and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim is fabricated according to work instructions and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attach trim

  1. Trim materials are fitted and checked for alignment, appearance and quality according to job specifications and workplace instructions
  2. Trim materials are attached to vehicle component and checked against specifications
Trim materials are fitted and checked for alignment, appearance and quality according to job specifications and workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trim materials are attached to vehicle component and checked against specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable materials is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable materials is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from workplace instructions

1.2 Trim materials are selected and inspected for quality

1.3 Safety data sheets (SDS) are sourced and interpreted

1.4 Hazards associated with the work are identified and risks are managed

1.5 Trim tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.6 Work is planned to minimise waste and use time efficiently

2. Measure, mark, cut and fabricate trim

2.1 Material patterns are developed and prepared for use

2.2 Trim materials are measured, marked and cut according to workplace instructions and prepared pattern

2.3 Trimming tools and equipment are used according to workplace procedures and safety and environmental requirements

2.4 Trim is fabricated according to work instructions and job requirements

3. Attach trim

3.1 Trim materials are fitted and checked for alignment, appearance and quality according to job specifications and workplace instructions

3.2 Trim materials are attached to vehicle component and checked against specifications

4. Complete work processes

4.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable materials is collected and stored

4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare for work

1.1 Job requirements are determined from workplace instructions

1.2 Trim materials are selected and inspected for quality

1.3 Safety data sheets (SDS) are sourced and interpreted

1.4 Hazards associated with the work are identified and risks are managed

1.5 Trim tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability

1.6 Work is planned to minimise waste and use time efficiently

2. Measure, mark, cut and fabricate trim

2.1 Material patterns are developed and prepared for use

2.2 Trim materials are measured, marked and cut according to workplace instructions and prepared pattern

2.3 Trimming tools and equipment are used according to workplace procedures and safety and environmental requirements

2.4 Trim is fabricated according to work instructions and job requirements

3. Attach trim

3.1 Trim materials are fitted and checked for alignment, appearance and quality according to job specifications and workplace instructions

3.2 Trim materials are attached to vehicle component and checked against specifications

4. Complete work processes

4.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable materials is collected and stored

4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

4.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

manufacture and attach two different trim components.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to trimming vehicle components, including procedures for:

selecting and using personal protective equipment (PPE)

using safety data sheets (SDS) for trim materials

using specialist tools and equipment

manual handling techniques

environmental requirements, including procedures for storing and disposing of waste materials

types and uses of trimming materials, including detection of faults and repair defects

types and uses of specialist tools and equipment needed to manufacture and attach trim components

techniques and procedures for trimming components, including:

measuring, marking and cutting

sewing techniques

trim removal and replacement

trim cleaning

procedures for protecting vehicle and components when trimming components

procedures for final inspection of trimmed component.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Trim tools and equipment must include:

sewing machines

hand tools.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using SDS for trim materials

using specialist tools and equipment

manual handling techniques

environmental requirements, including procedures for storing and disposing of waste materials.