The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare to weld
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Welding information is accessed and interpreted Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Tools and equipment are selected and checked for serviceability Completed |
Evidence:
|
Work area is prepared and work is planned to carry out TIG welding, minimise waste, and use time efficiently Completed |
Evidence:
|
Weld materials using TIG welder
|
|
TIG welding equipment is prepared, set up and adjusted for specific welding job requirement Completed |
Evidence:
|
TIG welding equipment is used according to manufacturer operating procedures and safety and environmental requirements Completed |
Evidence:
|
Weld test runs are conducted according to workplace instructions and weld specifications Completed |
Evidence:
|
Materials are welded using standard or inverter TIG process to industry standards Completed |
Evidence:
|
Check welds
|
|
Welds are cleaned using appropriate tools and techniques and according to workplace instructions Completed |
Evidence:
|
Weld specifications and quality requirements are checked and confirmed by non-destructive inspection Completed |
Evidence:
|
Weld defects are identified, prepared for re-welding as required, and appropriate personnel are notified Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|
Plan and prepare to weld
|
|
Job requirements are determined from workplace instructions Completed |
Evidence:
|
Welding information is accessed and interpreted Completed |
Evidence:
|
Hazards associated with the work are identified and risks are managed Completed |
Evidence:
|
Tools and equipment are selected and checked for serviceability Completed |
Evidence:
|
Work area is prepared and work is planned to carry out TIG welding, minimise waste, and use time efficiently Completed |
Evidence:
|
Weld materials using TIG welder
|
|
TIG welding equipment is prepared, set up and adjusted for specific welding job requirement Completed |
Evidence:
|
TIG welding equipment is used according to manufacturer operating procedures and safety and environmental requirements Completed |
Evidence:
|
Weld test runs are conducted according to workplace instructions and weld specifications Completed |
Evidence:
|
Materials are welded using standard or inverter TIG process to industry standards Completed |
Evidence:
|
Check welds
|
|
Welds are cleaned using appropriate tools and techniques and according to workplace instructions Completed |
Evidence:
|
Weld specifications and quality requirements are checked and confirmed by non-destructive inspection Completed |
Evidence:
|
Weld defects are identified, prepared for re-welding as required, and appropriate personnel are notified Completed |
Evidence:
|
Complete work processes
|
|
Final inspection is made to ensure work meets workplace expectations and component is presented ready for use Completed |
Evidence:
|
Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored Completed |
Evidence:
|
Tools and equipment are checked, reported if faulty, and stored according to workplace procedures Completed |
Evidence:
|
Workplace documentation is processed according to workplace procedures Completed |
Evidence:
|