The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Climb RPAS
|
|
Clarity of flight path is observed and risks are mitigated in accordance with workplace procedures Completed |
Evidence:
|
RPAS climb checks are completed in accordance with workplace policies and procedures Completed |
Evidence:
|
Adjustments are made to attitude and power to achieve an increase of altitude at shallow, normal and steep rates and cruise conditions of flight, during straight and turning manoeuvres as required Completed |
Evidence:
|
RPAS is maintained in trim condition as required Completed |
Evidence:
|
RPAS is levelled off at or below 400 feet above ground level (AGL) Completed |
Evidence:
|
Situational awareness, lookout and air traffic separation are maintained in accordance with workplace procedures and regulatory requirements Completed |
Evidence:
|
Maintain straight and level flight
|
|
Power, altitude and configuration are set to achieve straight and level flight as required Completed |
Evidence:
|
RPAS is maintained in trim condition as required Completed |
Evidence:
|
Visible signs or electronic indications of height change are identified and responded to appropriately Completed |
Evidence:
|
Visible signs or electronic indications of heading change are identified and responded to appropriately Completed |
Evidence:
|
Clarity of flight path is observed and risks are mitigated in accordance with workplace procedures Completed |
Evidence:
|
Situational awareness, lookout and air traffic separation are maintained in accordance with workplace procedures and regulatory requirements Completed |
Evidence:
|
Turn RPAS in flight
|
|
RPAS operating limits are maintained during turns in accordance with workplace procedures and manufacturer instructions Completed |
Evidence:
|
Situational awareness, lookout and air traffic separation are maintained during turns Completed |
Evidence:
|
Potential hazards are identified and controlled during turns Completed |
Evidence:
|
Control RPAS speed in flight
|
|
Height awareness is maintained during slow speed flight Completed |
Evidence:
|
Recovery to cruise speed is achieved while maintaining height during flight Completed |
Evidence:
|
Descend RPAS
|
|
Adjustments are made to altitude and power to achieve a decrease of altitude at shallow, normal and steep rates as required Completed |
Evidence:
|
RPAS is maintained in trim condition as required Completed |
Evidence:
|
RPAS is levelled from a descent position at a nominated altitude in accordance with workplace policies and procedures, and manufacturer instructions Completed |
Evidence:
|
Clarity of flight path is observed during RPAS descent and risks are mitigated in accordance with workplace procedures Completed |
Evidence:
|
RPAS operating limits are controlled during descent in accordance with workplace procedures and manufacturer instructions Completed |
Evidence:
|
Descent checks are completed in accordance with workplace procedures and regulatory requirements Completed |
Evidence:
|
Situational awareness, lookout and air traffic separation are maintained in accordance with regulatory requirements and workplace procedures Completed |
Evidence:
|
Perform RPAS landing approaches
|
|
Approaches are conducted in accordance with operations manual procedures appropriate to the RPAS type, with allowance for wind velocity Completed |
Evidence:
|
All mandated checklists are completed and communications procedures are followed Completed |
Evidence:
|
Traffic conflict or adverse flight conditions are recognised and a go-around/position–hold is performed from any position in the approach and landing pattern Completed |
Evidence:
|
Radio listening watch is maintained in accordance with established procedures and regulatory requirements Completed |
Evidence:
|
RPAS is configured for landing in accordance with workplace procedures and manufacturer instructions Completed |
Evidence:
|
Comply with airspace requirements
|
|
Compliance is maintained at all times with air traffic requirements and controlled or restricted airspace conditions or limitations Completed |
Evidence:
|
Safe progress of flight is ensured at all times Completed |
Evidence:
|
Awareness of RPAS position is maintained at all times Completed |
Evidence:
|
Radio listening watch is maintained in accordance with established procedures and regulatory requirements Completed |
Evidence:
|
Weather conditions are monitored and responded to appropriately accordance with regulatory requirements, and workplace policies and procedures Completed |
Evidence:
|