The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare to set up, operate and maintain indirect action EPTs.
|
|
Review and clarify task to set up, operate and maintain indirect action EPTs. Completed |
Evidence:
|
Review work health and safety (WHS)requirements for the task in accordance with safety plans and policies. Completed |
Evidence:
|
Identify safety signage and barricade requirements. Completed |
Evidence:
|
Review environmental requirements for the task in accordance with environmental plans and legislative requirements. Completed |
Evidence:
|
Calculate material quantity requirements. Completed |
Evidence:
|
Check EPTs for operation in accordance with manufacturers’ specifications and safety requirements for use of EPT. Completed |
Evidence:
|
Set out fasteners.
|
|
Erect identified safety signage and barricades, and fit personal protective equipment (PPE). Completed |
Evidence:
|
Select fastener in accordance with requirements of the job. Completed |
Evidence:
|
Set-out fasteners adhering to minimum distances for set outfrom edge of substrate material in accordance with requirements. Completed |
Evidence:
|
Position material, check it is level, and temporarily fix or clamp into designed position in accordance with detailed drawings. Completed |
Evidence:
|
Operate EPTs.
|
|
Select charge in accordance with the requirements for material, base and penetration. Completed |
Evidence:
|
Install any attachmentsand accessories to EPT in accordance with manufacturers’ specifications and WHS requirements. Completed |
Evidence:
|
Load fastener and charge into EPT in accordance with manufacturers’ specification. Completed |
Evidence:
|
Carry out EPT operation and fix fastener into place in accordance with manufacturers’ specifications and legislative requirements. Completed |
Evidence:
|
Check depth of fastening penetration and adjust power regulating device in accordance with conditions. Completed |
Evidence:
|
Carry out misfire procedures in accordance with manufacturers’ specifications and legislative requirements. Completed |
Evidence:
|
Remove temporary holdings and fixings without damage to material. Completed |
Evidence:
|
Maintain EPTs and kit.
|
|
Check safety features of tools for serviceability in accordance with manufacturers’ specifications. Completed |
Evidence:
|
Clean and lubricate tools in accordance with manufacturers’ specifications. Completed |
Evidence:
|
Carry out periodic maintenance service in accordance with manufacturers’ specifications. Completed |
Evidence:
|
Replenish diminished stocks of charges and fasteners to designed effectiveness of EPT kit. Completed |
Evidence:
|
Check and complete logbook and record maintenance in accordance with manufacturers’ specifications. Completed |
Evidence:
|
Secure and store EPT equipment and charges.
|
|
Store used charges in designated container in accordance with requirements. Completed |
Evidence:
|
Store unused fasteners, the EPT and attachments in a carry case in line with manufacturers’ specifications. Completed |
Evidence:
|
Clean up after operating EPTs.
|
|
Clear work area and dispose of, reuse or recycle materials in accordance with legislation, regulations, codes of practice and task requirements. Completed |
Evidence:
|
Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications and workplace requirements. Completed |
Evidence:
|