The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare.
|
|
Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Material quantity requirements are calculated in accordance with plans, specifications and quality requirements. Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority requirements, and are applied. Completed |
Evidence:
|
Identify static machines, their operation and safety requirements.
|
|
Types and functions of static machines are identified for use in off-site production. Completed |
Evidence:
|
Method of operation of machines is identified in accordance with manufacturer's operating manual. Completed |
Evidence:
|
OHS requirements for guard attachment and cut-off switches are identified. Completed |
Evidence:
|
OHS requirements for personal protective equipment (PPE) associated with using machines are identified and used. Completed |
Evidence:
|
Quality assurance requirements of organisation's machining operations are recognised and adhered to. Completed |
Evidence:
|
Prepare machine for use.
|
|
Particular safety requirements for preparing and using static machines are recognised and adhered to. Completed |
Evidence:
|
Appropriate PPE is selected, correctly fitted and used. Completed |
Evidence:
|
Machine is set up to required operating process and setting with fences/guides locked to position in accordance with standard operating procedures. Completed |
Evidence:
|
Operate machine.
|
|
Machine start-up procedure is carried out to manufacturer recommendations. Completed |
Evidence:
|
Material is fed to machine, where applicable, in accordance with manufacturer recommendations, safe handling procedures and standard operating procedures. Completed |
Evidence:
|
Material is set up and held in place, where applicable, for mobile machine and moving table operations in accordance with manufacturer recommendations. Completed |
Evidence:
|
Machine is operated in accordance with its designed capacity and purpose and to manufacturer specifications and OHS requirements. Completed |
Evidence:
|
Machine shut-down procedure is carried out to manufacturer recommendations and under supervisor's instructions. Completed |
Evidence:
|
Maintain machine and attachments.
|
|
Machines are maintained through regular servicing to manufacturer's operating manual. Completed |
Evidence:
|
Major faults are identified and reported to responsible supervisor. Completed |
Evidence:
|
Minor faults are identified and corrected where applicable, under supervision. Completed |
Evidence:
|
Assistance is given when cutters/blades and attachments are fitted and secured to manufacturer specifications, under supervisor's instruction. Completed |
Evidence:
|
Clean up.
|
|
Machine is cleaned and waste material disposed of safely under supervisor's instruction. Completed |
Evidence:
|
Cutters, blades and attachments are cleaned, checked and stored under supervisor's instruction. Completed |
Evidence:
|