The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan work.
|
|
Potential workplace hazards are identified. Completed |
Evidence:
|
Hazard control measures are identified consistent with appropriate standards to ensure the safety of personnel and equipment. Completed |
Evidence:
|
Weight of the load is identified and estimated in consultation with appropriate personnel. Completed |
Evidence:
|
Crane is appropriate for the load/s and workplace conditions. Completed |
Evidence:
|
The appropriate paths for the movement of loads in the work area are inspected and determined. Completed |
Evidence:
|
Appropriate communication methods are identified with appropriate personnel. Completed |
Evidence:
|
Conduct routine checks.
|
|
Crane is visually checked for any damage or defects. Completed |
Evidence:
|
Crane is accessed in safe manner (where applicable). Completed |
Evidence:
|
All signage and labels are visible and legible according to the appropriate standard. Completed |
Evidence:
|
Routine pre-operational crane checks are carried out according to procedures. Completed |
Evidence:
|
All controls located and identified. Completed |
Evidence:
|
Crane service logbook is checked for compliance. Completed |
Evidence:
|
Crane is started according to procedures and checked for any abnormal noises. Completed |
Evidence:
|
All crane safety devices are tested according to procedures. Completed |
Evidence:
|
Post start operational checks are carried out according to procedures. Completed |
Evidence:
|
All communication equipment is checked for serviceability Completed |
Evidence:
|
All damage and defects are reported and recorded according to procedures and appropriate action taken. Completed |
Evidence:
|
Transfer loads.
|
|
Lifts are determined within the capacity of the crane. Completed |
Evidence:
|
Appropriate hazard prevention/control measures are applied to the work area according to procedures in consultation with appropriate personnel. Completed |
Evidence:
|
Boom/jib and hoist block is positioned over load following directions from appropriate personnel. Completed |
Evidence:
|
Test lift is carried out to procedures. Completed |
Evidence:
|
Loads are transferred using all relevant crane movements according to procedures and appropriate standards. Completed |
Evidence:
|
All required communication signals are interpreted correctly according to procedures and the appropriate standard. Completed |
Evidence:
|
Crane is operated according to procedures. Completed |
Evidence:
|
Load movement is monitored constantly to ensure safety of personnel, load and crane stability. Completed |
Evidence:
|
Unplanned and/or unsafe situations are responded to in line with procedures. Completed |
Evidence:
|
Shut down and secure crane.
|
|
Crane is placed in weather vain mode according to procedures (where applicable). Completed |
Evidence:
|
Relevant motion locks and brakes are applied (where applicable). Completed |
Evidence:
|
Crane and equipment is secured correctly, according to procedures and the appropriate standard. Completed |
Evidence:
|
Crane is shut down according to procedures Completed |
Evidence:
|
Routine post-operational checks on crane are carried out, according to procedures. Completed |
Evidence:
|
All damage and defects are reported and recorded according to procedures and appropriate action taken. Completed |
Evidence:
|