The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare.
|
|
Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Material quantity requirements are calculated in accordance with plans and specifications and quality requirements. Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied. Completed |
Evidence:
|
Assess risks arising from the relocation of the load.
|
|
Products, goods or materials to be relocated are identified. Completed |
Evidence:
|
Characteristics of load in relation to weight, shape, balance and dimensions are identified. Completed |
Evidence:
|
Environmental factors influencing the shift, including wind, trip hazards, wet conditions and traffic (vehicular and personal), are assessed for effect on personal safety. Completed |
Evidence:
|
Appropriate strategies for shifting load are selected based on workplace-approved manual handling procedures. Completed |
Evidence:
|
Location for storage is determined. Completed |
Evidence:
|
Routes to be followed and potential risks are identified and strategies to minimise risks are identified. Completed |
Evidence:
|
Points of balance are estimated. Completed |
Evidence:
|
Procedures for safe use of lifting equipment to minimise risks are identified. Completed |
Evidence:
|
Plan load relocation.
|
|
Required load shifting equipment is selected and the safe working load (SWL) and working load limit (WLL) are identified and compared to the load to be shifted. Completed |
Evidence:
|
Process for relocating load proposed is determined, including planning for potential difficulties in the work environment. Completed |
Evidence:
|
Proposed process is checked against relevant code of practice and workplace procedures for compliance. Completed |
Evidence:
|
Lifting equipment and accessories are checked for safe operation following manufacturers' instructions and workplace procedures. Completed |
Evidence:
|
Relocate load.
|
|
Unsafe equipment is reported to appropriate personnel. Completed |
Evidence:
|
Planned process and route are followed, using equipment within necessary range of limitations. Completed |
Evidence:
|
Relocated materials are set down without damage to goods, personnel or equipment and checked for stability. Completed |
Evidence:
|
Relocation is checked to see that it meets work requirements, and any variations are reported. Completed |
Evidence:
|
Equipment is returned to storage area. Completed |
Evidence:
|