The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare.
|
|
Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. Completed |
Evidence:
|
Safety (OHS) requirements are followed in accordance with safety plans and policies. Completed |
Evidence:
|
Signage and barricade requirements are identified and implemented. Completed |
Evidence:
|
Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability and any faults are rectified or reported prior to commencement. Completed |
Evidence:
|
Sealant material quantity requirements are calculated in accordance with plans, specifications and quality requirements. Completed |
Evidence:
|
Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. Completed |
Evidence:
|
Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority requirements, and are applied. Completed |
Evidence:
|
Prepare surface to receive sealants.
|
|
Surface is cleaned free of contaminants such as oil, grease, dust or moisture. Completed |
Evidence:
|
Surface is prepared by sanding and/or cleaning in accordance with preparation specifications. Completed |
Evidence:
|
Apply sealant.
|
|
Sealant materials are applied to manufacturer recommendations and specifications. Completed |
Evidence:
|
Care is taken to ensure no air is trapped within applied sealant. Completed |
Evidence:
|
Surfaces are aligned and fixings correctly installed to specifications. Completed |
Evidence:
|
Install sealant devices.
|
|
Sealant devices are fitted securely to specified positions. Completed |
Evidence:
|
Assistance is provided to secure installation of fixtures, assuring level and plumb to line. Completed |
Evidence:
|
Clean up.
|
|
Excessive sealant is removed from joints and surrounding surfaces, and cartridge nozzle or container is sealed securely. Completed |
Evidence:
|
Sealants are promptly removed from tools and equipment. Completed |
Evidence:
|
Work area is cleared and waste material and debris are disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specifications. Completed |
Evidence:
|
Tools and equipment are cleaned, routinely maintained and returned to store. Completed |
Evidence:
|