The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify structural requirements and loads commonly used in structural design.
|
|
Structural requirements relating to equilibrium, stability, strength, functionality, economy and aesthetics are determined in adherence to legislative requirements. Completed |
Evidence:
|
Different types of loading and loading methods and the effect on structures are identified and documented in accordance with BCA, relevant Australian standards, suppliers' technical data and empirical methods. Completed |
Evidence:
|
Analyse the effects of force and moments on structural elements.
|
|
Force, moments and equilibrium of force and the effects on structures are identified and analysis is conducted and recorded. Completed |
Evidence:
|
Equilibrium of forces for co-planar systems in consideration of stability is identified and compared for performance. Completed |
Evidence:
|
Analyse properties and behaviour of structural materials.
|
|
Effect of force on materials in tension, compression, stress, strain and elasticity is identified and recorded. Completed |
Evidence:
|
Structural properties and performances are differentiated for common materials and recorded. Completed |
Evidence:
|
Identify section properties of structural elements and their effect on structural performance.
|
|
Cross-sectional geometry and common structural shapes are identified. Completed |
Evidence:
|
Section properties and the relationship between first and second area moments, section modules and gyration and deflection of beams are identified and compared for performance. Completed |
Evidence:
|
Section properties' values for I (moment of inertia), Z (section modulus) and R (radius) for common sections are determined using tables or standard formulas and compared for performance. Completed |
Evidence:
|
Compare the performance and properties of spanning elements.
|
|
Structural considerations of loaded spanning elements for bending moments, shear forces, deflection and torsion are determined and compared for performance. Completed |
Evidence:
|
Bending behaviour and performance of loaded support beams of various types, shapes, spans and loads are determined and compared for performance. Completed |
Evidence:
|
Effect that connections have upon the structural performance of beams is identified and compared for performance. Completed |
Evidence:
|
Principles of slab behaviour in relation to spans and stress distribution are identified and compared for performance. Completed |
Evidence:
|
Determine performance criteria for columns.
|
|
Effect of slenderness ratio that changes in length, cross-sections, connections and materials will have on the strength of a column are determined and compared for performance. Completed |
Evidence:
|
Eccentric and axial load effect on the strength of column section and materials are determined and compared for performance. Completed |
Evidence:
|
Identify factors affecting design of connections between structural elements.
|
|
Transmission of forces between structural elements are determined and compared for performance. Completed |
Evidence:
|
Methods of distributing stresses in connections between structural elements are determined and compared for performance. Completed |
Evidence:
|
Outline how loads of various types occur and impinge on a building structure.
|
|
Differences between types of loading, including dead load, live load, wind load, earthquake load and other load, causing actions are determined and compared for performance. Completed |
Evidence:
|
Dead and live loads using BCA and relevant Australian standards are determined. Completed |
Evidence:
|
Indication of direction of wind pressures on the various surfaces of buildings specified in BCA and relevant Australian standards are determined. Completed |
Evidence:
|