The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for work.
|
|
Drawings and specifications are obtained and confirmed by site inspection. Completed |
Evidence:
|
Safety (OHS) requirements associated with installing curved roof structures, and workplace environmental requirements, are adhered to throughout the work. Completed |
Evidence:
|
Quality assurance requirements are identified and adhered to in accordance with workplace requirements. Completed |
Evidence:
|
Tasks are planned and sequenced in conjunction with others involved in or affected by the work and statutory and regulatory authority requirements. Completed |
Evidence:
|
Tools and equipment, including personal protective equipment, are selected and checked for serviceability. Completed |
Evidence:
|
Work area is prepared to support efficient installation of roof coverings to curved roof structures. Completed |
Evidence:
|
Identify installation requirements.
|
|
Quantity and type of manufactured roof covering, and fittings and equipment required, are calculated from design drawings and specifications in compliance with relevant Australian standards, local authorities' requirements and relevant information. Completed |
Evidence:
|
Proposed sealant, fixing materials, roofing and flashing materials are selected and checked for compatibility. Completed |
Evidence:
|
Materials and equipment are identified, ordered and collected in accordance with workplace procedures. Completed |
Evidence:
|
Materials and equipment are checked for compliance with docket and order form and for acceptable condition, and faults are reported. Completed |
Evidence:
|
Sustainability principles and concepts are applied to work preparation and application. Completed |
Evidence:
|
Install roof coverings.
|
|
Safety mesh and thermal insulation are fixed in accordance with relevant Australian standards, job specification and manufacturer requirements. Completed |
Evidence:
|
Sheets are marked and trimmed prior to fixing and cut edges are treated according to manufacturer specifications. Completed |
Evidence:
|
Roof covering is installed in accordance with manufacturer specifications. Completed |
Evidence:
|
Roof covering is performance tested and remedied. Completed |
Evidence:
|
Clean up.
|
|
Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice and job specification. Completed |
Evidence:
|
Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures. Completed |
Evidence:
|
Documentation is completed in accordance with workplace requirements. Completed |
Evidence:
|