The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for operation
|
|
Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to cross cutting materials with a fixed saw are identified and followed Completed |
Evidence:
|
Pre-startup checks are completed on equipment in line with manufacturer recommendations and site procedures Completed |
Evidence:
|
Materials are identified, positioned and secured in line with work order and site procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Limitations are identified and assistance is sought as required in line with site procedures Completed |
Evidence:
|
Cross cut materials
|
|
Materials are visually assessed for defects in line with site standards Completed |
Evidence:
|
Materials are cut within established standard tolerances for length and angle relative to centre line in line with OHS requirements Completed |
Evidence:
|
Equipment is operated in line with OHS and site safety standards Completed |
Evidence:
|
Cuttingtechniques maximise volume and quality of recovery in line with work orders and industry standard lengths Completed |
Evidence:
|
Work area is regularly checked and cleared in line with OHS requirements, site procedures and environmental requirements Completed |
Evidence:
|
Sub-standard material is disposed of in line with site procedures and environmental requirements Completed |
Evidence:
|
Problems are identified and reported in line with site procedures Completed |
Evidence:
|
Materials are tagged, and required records and reports completed in line with site standards and procedures Completed |
Evidence:
|
Maintain sawing conditions
|
|
Equipment lock-out procedures are applied in line with OHS requirements and site procedures Completed |
Evidence:
|
Cutting rate is compared with that anticipated from knowledge of saw, size of log, species and condition Completed |
Evidence:
|
Saw blades are checked for blunt or damaged condition in line with site procedures Completed |
Evidence:
|
Blunt or damaged saw blades are identified and dealt with in line with site procedures, manufacturer recommendations and environmental requirements Completed |
Evidence:
|
Malfunctions, damage or irregular performance are identified, recorded and reported in line with site requirements Completed |
Evidence:
|
Equipment is cleaned, maintained and stored in line with manufacturer recommendations, site procedures and environmental requirements Completed |
Evidence:
|