The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine required cutting tool dimensions
|
|
Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to sharpening cutting tools are identified and followed Completed |
Evidence:
|
Work order is reviewed and clarified with appropriate personnel Completed |
Evidence:
|
Site documentation and drawings are obtained and reviewed to verify cutting tool dimensions Completed |
Evidence:
|
Cutter angles are checked to improve efficiency by minimising expended cutting energy in mill operations Completed |
Evidence:
|
Cutting tool condition is checked against required dimensions, angles and finish Completed |
Evidence:
|
Additional cutting processes are assessed and documented in line with workplace procedures Completed |
Evidence:
|
Select and set up grinder
|
|
Work is conducted using prescribed safe operating practices and in line with workplace procedures Completed |
Evidence:
|
Suitable personal protective equipment and clothing are used and maintained Completed |
Evidence:
|
Potential and existing risks and hazards in the work area are identified and controlled Completed |
Evidence:
|
Grinder and attachments are selected and set up to suit required operations on cutting tool and final dimensions Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Sharpen cutting tool
|
|
Grinderoperations are conducted efficiently and safely in line with manufacturer recommendations Completed |
Evidence:
|
Grinder is monitored for operational effectiveness and coolant is applied as required in line with manufacturer recommendations Completed |
Evidence:
|
Cutting angles are maintained and cutting edges are ground until nicks, lands and other imperfections are removed in line with workplace procedures Completed |
Evidence:
|
Cutting tool teeth are systematically checked for consistent measurements to specifications Completed |
Evidence:
|
Cutting tool is removed and stored to maintain cutting edges in line with workplace procedures Completed |
Evidence:
|
Cutting tools that cannot be sharpened or are damaged during the process and cannot be repaired are dealt with in line with site procedures, manufacturer recommendations and environmental requirements Completed |
Evidence:
|
Faults, malfunctions and problems are recognised, recorded and reported in line with workplace procedures Completed |
Evidence:
|