The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Inspect and test saw and equipment
|
|
Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to assessing and maintaining saw performance are identified and followed Completed |
Evidence:
|
Information relating to current and past performance problems is obtained and reviewed to assess process problems Completed |
Evidence:
|
Saw and equipment are observed under a range of operating conditions to determine the extent of the problems Completed |
Evidence:
|
Timber fed through saw is examined to determine potential causes of cutting problem Completed |
Evidence:
|
Saw and equipment are inspected to identify worn, broken and loose components in line with manufacturer instructions and recommendations Completed |
Evidence:
|
Equipment lock-out procedures are applied in line with OHS and workplace procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Assess technical performance
|
|
Technical performance of sawing operation is assessed to identify future improvements in line with site procedures Completed |
Evidence:
|
Technical performance is compared against other equipment to determine possible efficiencies Completed |
Evidence:
|
Options for new equipment are assessed to determine feasibility of improvements in performance Completed |
Evidence:
|
Endorsement from appropriate personnel of identified improvements is obtained as required Completed |
Evidence:
|
Rectify saw problems
|
|
Potential causes are diagnosed through the occurring problem and its characteristics Completed |
Evidence:
|
Assessed causes are validated by reference to other trades and by operations personnel Completed |
Evidence:
|
Multiple causes are assessed and action is planned, with alternative courses of action canvassed with relevant personnel to identify and agree on preferred option Completed |
Evidence:
|
Selected course of action is implemented and cutting results are re-examined and reviewed Completed |
Evidence:
|
Action and results are communicated to appropriate personnel Completed |
Evidence:
|
Causes of cutting problems and actions taken are accurately recorded and reported in line with site procedures Completed |
Evidence:
|