The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for saw setting
|
|
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to filing and settingsaws are identified and followed Completed |
Evidence:
|
Work order is reviewed and checked with appropriate personnel Completed |
Evidence:
|
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations Completed |
Evidence:
|
Setting process is planned in line with site procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Set saw
|
|
Saw is set up in a selected jig to allow setting work to be conducted Completed |
Evidence:
|
Kerf and finish requirements are checked to suit horsepower of the machine, the type of saw and cutting conditions Completed |
Evidence:
|
Individual teeth are examined to check amount of setting required Completed |
Evidence:
|
Condition of welding, saw temper and consistency of set between alternate teeth are maintained by setting Completed |
Evidence:
|
Teeth are measured and assessed for the correct setting placement in line with site procedures Completed |
Evidence:
|
Teeth are bevelled and bevel length is assessed in line with site procedures Completed |
Evidence:
|
Set is applied to teeth requiring resetting allowing for estimated spring back Completed |
Evidence:
|
Set of teeth is checked using gauges in line with site procedures Completed |
Evidence:
|
Saw setting process and equipment faults are investigated and recorded and reported in line with site requirements Completed |
Evidence:
|