The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for machining
|
|
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to machining material are identified and followed Completed |
Evidence:
|
Work order is reviewed and checked with appropriate personnel Completed |
Evidence:
|
Type and quantity of material to be machined is acquired from the storagelocation Completed |
Evidence:
|
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations Completed |
Evidence:
|
Material machining process is planned in line with site procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Set up machines
|
|
Safety equipment, including emergency stops, gauges, guards and controls are checked Completed |
Evidence:
|
Machine settings and adjustments are made in line with job requirements, and machine and tool manufacturer's instructions Completed |
Evidence:
|
Trial runs are conducted to check machine operation, accuracy and quality of finished work Completed |
Evidence:
|
Material machined during the trial run is accepted or rejected and disposed of in line with site procedures and environmental requirements Completed |
Evidence:
|
Necessary adjustments are made to machine settings Completed |
Evidence:
|
Operate machines
|
|
Pre start-up checks are carried out on equipment in line with site requirements Completed |
Evidence:
|
Machine is operated in line with manufacturer's instructions, safe handling procedures, standard workplace operating procedures and environmental protection requirements Completed |
Evidence:
|
Machine operation is monitored to ensure product quality and output Completed |
Evidence:
|
Material is safely stacked in a designated location in line with work order requirements Completed |
Evidence:
|
Waste quantities are checked and minimised and items that do not meet quality requirements repaired, recycled or discarded in line with site procedures and environmental requirements Completed |
Evidence:
|
Fixed cutter heads are removed and replaced in line with site procedures Completed |
Evidence:
|
Straight cutters are jointed in line with site procedures Completed |
Evidence:
|
Machining outcomes and equipment faults or maintenance requirements are recorded and reported to the appropriate personnel Completed |
Evidence:
|