The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare removable stone die
|
|
Pour-up die stone horseshoe Completed |
Evidence:
|
Grind base of die stone to appropriate height and with level occlusal plane Completed |
Evidence:
|
Trim away undercuts from base of die stone model Completed |
Evidence:
|
Prepare die model for dowel pin and base in accordance with manufacturer's instructions Completed |
Evidence:
|
Duplicate model
|
|
Prepare materials to duplicate models in accordance with manufacturer's instructions Completed |
Evidence:
|
Mix stones, die-stones and refractories in accordance with manufacturer instructions Completed |
Evidence:
|
Produce an accurate, bubble free duplicate model Completed |
Evidence:
|
Wax and invest fixed partial dentures and structures
|
|
Wax up crown and bridge restorations Completed |
Evidence:
|
Sprue crown and bridge wax pattern and prepare for investing Completed |
Evidence:
|
Select appropriate investment material according to the alloy to be used Completed |
Evidence:
|
Prepare investment material according to the manufacturer's instructions Completed |
Evidence:
|
Invest wax patterns Completed |
Evidence:
|
Burnout, cast and finish alloy fixed partial dentures and structures
|
|
Select burnout techniques appropriate to the investment material and alloy Completed |
Evidence:
|
Cast metal restorations in appropriate alloy Completed |
Evidence:
|
Devest metal restoration without damaging casting Completed |
Evidence:
|
Check the casting for defects Completed |
Evidence:
|
Trim and polish metal restoration while maintaining all contact areas and margins Completed |
Evidence:
|
Evaluate the finished restoration Completed |
Evidence:
|
Decontaminate the casting according to infection control guidelines Completed |
Evidence:
|
Dry the casting, replace on model and place in a sealed container for dispatch Completed |
Evidence:
|