The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for edging and fitting
|
|
Access required information and prescriptions Completed |
Evidence:
|
Prepare the environment Completed |
Evidence:
|
Check equipment and instruments to be used Completed |
Evidence:
|
Use personal protective equipment if required Completed |
Evidence:
|
Operate optical equipment
|
|
Use optical equipment to edge and fit lenses Completed |
Evidence:
|
Clean equipment and attachments in accordance with manufacturer's requirements and infection control procedures Completed |
Evidence:
|
Undertake regular maintenance procedures on equipment in accordance with manufacturers requirements and infection control procedures Completed |
Evidence:
|
Store equipment and attachments in accordance with manufacturer's requirements and organisation policies and procedures Completed |
Evidence:
|
Perform edging and fitting
|
|
Prepare for the edging of spectacle lenses Completed |
Evidence:
|
Edge lenses Completed |
Evidence:
|
Fit lenses to both plastic and metal frames Completed |
Evidence:
|
Use special hand-edging techniques to modify lenses for change-overs and centring corrections Completed |
Evidence:
|
Edge, groove and mount spectacle lenses to nyl-tag frames Completed |
Evidence:
|
Edge, drill and mount spectacle lenses to rimless frames Completed |
Evidence:
|
Perform frame adjustments, repairs and lens treatments
|
|
Repair and modify spectacle frames Completed |
Evidence:
|
Standard alignment of frames Completed |
Evidence:
|
Produce tinted lenses to required standards Completed |
Evidence:
|
Utilise computer technology
|
|
Select appropriate technology and software applications to achieve the requirements of the task Completed |
Evidence:
|
Adjust workspace, furniture and equipment to suit the ergonomic requirements of the user Completed |
Evidence:
|
Use technology according to organisation requirements and in a way which promotes a safe work environment Completed |
Evidence:
|
Carry out or arrange routine maintenance in order to ensure that equipment is maintained in accordance with manufacturer's instructions and organisation requirements Completed |
Evidence:
|
Identify equipment faults and take action in accordance with manufacturer's instructions or by reporting fault to designated person Completed |
Evidence:
|
6 Conduct final checking procedures
|
|
Determine any axis or centring error and apply Australian standards tolerances. Completed |
Evidence:
|
Check the spectacles on the focimeter to verify powers, axes and centration Completed |
Evidence:
|
Check lens surface for scratching and aberrations Completed |
Evidence:
|
Adjust the frame to standard alignment Completed |
Evidence:
|
Check metal framed spectacles for strain Completed |
Evidence:
|
Clean spectacles Completed |
Evidence:
|