The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Operate equipment
|
|
Use relevant equipment to edge and fit lenses Completed |
Evidence:
|
Clean equipment and attachments in accordance with manufacturer's requirements and infection control procedures Completed |
Evidence:
|
Undertake regular maintenance procedures on equipment in accordance with manufacturers requirements and infection control procedures Completed |
Evidence:
|
Store equipment and attachments in accordance with manufacturer's requirements and organisation policies and procedures Completed |
Evidence:
|
Perform skills in edging and fitting
|
|
Check prescription requirements regarding segment heights, centres and other relevant components Completed |
Evidence:
|
Prepare for the edging of spectacle lenses Completed |
Evidence:
|
Edge lenses Completed |
Evidence:
|
Insert lenses into frames and other appliances using frame fitting equipment Completed |
Evidence:
|
Use special hand-edging techniques to modify lenses for change-overs and centring corrections Completed |
Evidence:
|
Edge, groove and mount spectacle lenses to nyl-tag frames Completed |
Evidence:
|
Edge, drill and mount spectacle lenses to rimless frames Completed |
Evidence:
|
Perform standard frame alignment Completed |
Evidence:
|
Fit atypical appliances Completed |
Evidence:
|
Utilise computer technology
|
|
Select appropriate technology and software applications to achieve the requirements of the task Completed |
Evidence:
|
Adjust workspace, furniture and equipment to suit the ergonomic requirements of the user Completed |
Evidence:
|
Use technology according to organisation requirements and in a way which promotes a safe work environment Completed |
Evidence:
|
Use edging equipment correctly and in accordance with the manufacturer's recommendations/instructions Completed |
Evidence:
|
Carry out or arrange routine maintenance in order to ensure that equipment is maintained in accordance with manufacturer's instructions and organisation requirements Completed |
Evidence:
|
Identify equipment faults and take action in accordance with manufacturer's instructions or by reporting fault to designated person Completed |
Evidence:
|
Perform frame modifications
|
|
Inspect frames for faults prior to glazing Completed |
Evidence:
|
Modify frames to client specifications Completed |
Evidence:
|
Repair frames Completed |
Evidence:
|
5. Conduct final checking procedures
|
|
Confirm the appliance against the prescription prior to delivery Completed |
Evidence:
|
Check that the correct type and form of lens was used in line with client requirements Completed |
Evidence:
|
Check lens treatments for quality Completed |
Evidence:
|
Check that the correct frame has been used in line with client request Completed |
Evidence:
|
Carry out and confirm standard frame alignment Completed |
Evidence:
|
Confirm completion of job Completed |
Evidence:
|