The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for set up
|
|
Job specifications are read and interpreted from job documentation or process control system Completed |
Evidence:
|
Set-up is carried out correctly and in minimum time Completed |
Evidence:
|
Paper/board quantity requirements are estimated, ordered and checked Completed |
Evidence:
|
Set up reel transportation system
|
|
Unwind reel is set up and adjusted according to job specifications Completed |
Evidence:
|
Webbing procedures are carried out according to machinery requirements Completed |
Evidence:
|
Web control system is set up and adjusted according to job specifications Completed |
Evidence:
|
Reels are spliced/joined according to job specifications Completed |
Evidence:
|
Set up machine for single facing
|
|
Steam delivery system is set up and adjusted to suit corrugating process and according to job specifications Completed |
Evidence:
|
Corrugating rolls and pressure roll are set to correct pressure Completed |
Evidence:
|
Starch delivery system is set up and adjusted to suit corrugating process and according to job specifications Completed |
Evidence:
|
Heat delivery system is set up and adjusted to suit corrugating process and according to job specifications Completed |
Evidence:
|
Set up in-line units
|
|
Wax units are set up and adjusted to suit corrugating process and according to job specifications Completed |
Evidence:
|
Coating units are set up and adjusted to suit corrugating process and according to job specifications Completed |
Evidence:
|
Slitters are set up and adjusted according to job specifications Completed |
Evidence:
|
Cut-off knife is set up and adjusted according to job specifications Completed |
Evidence:
|
Inspect and adjust quality
|
|
Inspection and/or testing of sample is organised Completed |
Evidence:
|
Sample is visually inspected and/or tested according to enterprise procedures Completed |
Evidence:
|
Results are interpreted to determine adjustment requirements Completed |
Evidence:
|
Adjustment changes are carried out according to product and machine specifications Completed |
Evidence:
|